cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

rohm,bd9571mwv.yaml (3324B)

      1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
      2%YAML 1.2
      3---
      4$id: http://devicetree.org/schemas/mfd/rohm,bd9571mwv.yaml#
      5$schema: http://devicetree.org/meta-schemas/core.yaml#
      6
      7title: ROHM BD9571MWV/BD9574MWF Power Management Integrated Circuit (PMIC)
      8
      9maintainers:
     10  - Marek Vasut <marek.vasut@gmail.com>
     11
     12properties:
     13  compatible:
     14    enum:
     15      - rohm,bd9571mwv
     16      - rohm,bd9574mwf
     17
     18  reg:
     19    maxItems: 1
     20
     21  interrupts:
     22    maxItems: 1
     23
     24  interrupt-controller: true
     25
     26  '#interrupt-cells':
     27    const: 2
     28
     29  gpio-controller: true
     30
     31  '#gpio-cells':
     32    const: 2
     33
     34  rohm,ddr-backup-power:
     35    $ref: /schemas/types.yaml#/definitions/uint32
     36    minimum: 0x0
     37    maximum: 0xf
     38    description: |
     39      Value to use for DDR-Backup Power (default 0).
     40      This is a bitmask that specifies which DDR power rails need to be kept
     41      powered when backup mode is entered, for system suspend:
     42        - bit 0: DDR0
     43        - bit 1: DDR1
     44        - bit 2: DDR0C
     45        - bit 3: DDR1C
     46      These bits match the KEEPON_DDR* bits in the documentation for the "BKUP
     47      Mode Cnt" register.
     48
     49  rohm,rstbmode-level:
     50    $ref: /schemas/types.yaml#/definitions/flag
     51    description:
     52      The RSTB signal is configured for level mode, to accommodate a toggle
     53      power switch (the RSTBMODE pin is strapped low).
     54
     55  rohm,rstbmode-pulse:
     56    $ref: /schemas/types.yaml#/definitions/flag
     57    description:
     58      The RSTB signal is configured for pulse mode, to accommodate a momentary
     59      power switch (the RSTBMODE pin is strapped high).
     60
     61  regulators:
     62    type: object
     63    description:
     64      List of child nodes that specify the regulator initialization data.
     65      Child nodes must be named after their hardware counterparts.
     66
     67    patternProperties:
     68      "^(vd09|vd18|vd25|vd33|dvfs)$":
     69        type: object
     70        $ref: ../regulator/regulator.yaml#
     71
     72        properties:
     73          regulator-name:
     74            pattern: "^(vd09|vd18|vd25|vd33|dvfs)$"
     75
     76        unevaluatedProperties: false
     77
     78    additionalProperties: false
     79
     80additionalProperties: false
     81
     82required:
     83  - compatible
     84  - reg
     85  - interrupts
     86  - interrupt-controller
     87  - '#interrupt-cells'
     88  - gpio-controller
     89  - '#gpio-cells'
     90
     91oneOf:
     92  - required:
     93      - rohm,rstbmode-level
     94  - required:
     95      - rohm,rstbmode-pulse
     96
     97examples:
     98  - |
     99    #include <dt-bindings/interrupt-controller/irq.h>
    100
    101    i2c {
    102          #address-cells = <1>;
    103          #size-cells = <0>;
    104
    105          pmic: pmic@30 {
    106                  compatible = "rohm,bd9571mwv";
    107                  reg = <0x30>;
    108                  interrupt-parent = <&gpio2>;
    109                  interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
    110                  interrupt-controller;
    111                  #interrupt-cells = <2>;
    112                  gpio-controller;
    113                  #gpio-cells = <2>;
    114                  rohm,ddr-backup-power = <0xf>;
    115                  rohm,rstbmode-pulse;
    116
    117                  regulators {
    118                          dvfs: dvfs {
    119                                  regulator-name = "dvfs";
    120                                  regulator-min-microvolt = <750000>;
    121                                  regulator-max-microvolt = <1030000>;
    122                                  regulator-boot-on;
    123                                  regulator-always-on;
    124                          };
    125                  };
    126          };
    127    };