cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

st,stmfx.yaml (3071B)

      1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
      2%YAML 1.2
      3---
      4$id: http://devicetree.org/schemas/mfd/st,stmfx.yaml#
      5$schema: http://devicetree.org/meta-schemas/core.yaml#
      6
      7title: STMicroelectonics Multi-Function eXpander (STMFX) bindings
      8
      9description: ST Multi-Function eXpander (STMFX) is a slave controller using I2C for
     10               communication with the main MCU. Its main features are GPIO expansion,
     11               main MCU IDD measurement (IDD is the amount of current that flows
     12               through VDD) and resistive touchscreen controller.
     13
     14maintainers:
     15  - Amelie Delaunay <amelie.delaunay@foss.st.com>
     16
     17properties:
     18  compatible:
     19    const: st,stmfx-0300
     20
     21  reg:
     22    enum: [ 0x42, 0x43 ]
     23
     24  interrupts:
     25    maxItems: 1
     26
     27  drive-open-drain: true
     28
     29  vdd-supply: true
     30
     31  pinctrl:
     32    type: object
     33
     34    properties:
     35      compatible:
     36        const: st,stmfx-0300-pinctrl
     37
     38      "#gpio-cells":
     39        const: 2
     40
     41      "#interrupt-cells":
     42        const: 2
     43
     44      gpio-controller: true
     45
     46      interrupt-controller: true
     47
     48      gpio-ranges:
     49        description: if all STMFX pins[24:0] are available (no other STMFX function in use),
     50                     you should use gpio-ranges = <&stmfx_pinctrl 0 0 24>;
     51                     if agpio[3:0] are not available (STMFX Touchscreen function in use),
     52                     you should use gpio-ranges = <&stmfx_pinctrl 0 0 16>, <&stmfx_pinctrl 20 20 4>;
     53                     if agpio[7:4] are not available (STMFX IDD function in use),
     54                     you should use gpio-ranges = <&stmfx_pinctrl 0 0 20>;
     55        maxItems: 1
     56
     57    patternProperties:
     58      "^[a-zA-Z]*-pins$":
     59        type: object
     60
     61        allOf:
     62          - $ref: ../pinctrl/pinmux-node.yaml
     63
     64        properties:
     65          pins: true
     66          bias-disable: true
     67          bias-pull-up: true
     68          bias-pull-pin-default: true
     69          bias-pull-down: true
     70          drive-open-drain: true
     71          drive-push-pull: true
     72          output-high: true
     73          output-low: true
     74
     75    additionalProperties: false
     76
     77    required:
     78      - compatible
     79      - "#gpio-cells"
     80      - "#interrupt-cells"
     81      - gpio-controller
     82      - interrupt-controller
     83      - gpio-ranges
     84
     85additionalProperties: false
     86
     87required:
     88  - compatible
     89  - reg
     90  - interrupts
     91
     92examples:
     93  - |
     94    #include <dt-bindings/interrupt-controller/arm-gic.h>
     95    i2c {
     96      #address-cells = <1>;
     97      #size-cells = <0>;
     98      stmfx@42 {
     99        compatible = "st,stmfx-0300";
    100        reg = <0x42>;
    101        interrupts = <8 IRQ_TYPE_EDGE_RISING>;
    102        interrupt-parent = <&gpioi>;
    103        vdd-supply = <&v3v3>;
    104
    105        stmfx_pinctrl: pinctrl {
    106          compatible = "st,stmfx-0300-pinctrl";
    107          #gpio-cells = <2>;
    108          #interrupt-cells = <2>;
    109          gpio-controller;
    110          interrupt-controller;
    111          gpio-ranges = <&stmfx_pinctrl 0 0 24>;
    112
    113          joystick_pins: joystick-pins {
    114            pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4";
    115            drive-push-pull;
    116            bias-pull-up;
    117          };
    118        };
    119      };
    120    };
    121...