sdhci-milbeaut.txt (1005B)
1* SOCIONEXT Milbeaut SDHCI controller 2 3This file documents differences between the core properties in mmc.txt 4and the properties used by the sdhci_milbeaut driver. 5 6Required properties: 7- compatible: "socionext,milbeaut-m10v-sdhci-3.0" 8- clocks: Must contain an entry for each entry in clock-names. It is a 9 list of phandles and clock-specifier pairs. 10 See ../clocks/clock-bindings.txt for details. 11- clock-names: Should contain the following two entries: 12 "iface" - clock used for sdhci interface 13 "core" - core clock for sdhci controller 14 15Optional properties: 16- fujitsu,cmd-dat-delay-select: boolean property indicating that this host 17 requires the CMD_DAT_DELAY control to be enabled. 18 19Example: 20 sdhci3: mmc@1b010000 { 21 compatible = "socionext,milbeaut-m10v-sdhci-3.0"; 22 reg = <0x1b010000 0x10000>; 23 interrupts = <0 265 0x4>; 24 voltage-ranges = <3300 3300>; 25 bus-width = <4>; 26 clocks = <&clk 7>, <&ahb_clk>; 27 clock-names = "core", "iface"; 28 cap-sdio-irq; 29 fujitsu,cmd-dat-delay-select; 30 };