cadence-nand-controller.txt (1746B)
1* Cadence NAND controller 2 3Required properties: 4 - compatible : "cdns,hp-nfc" 5 - reg : Contains two entries, each of which is a tuple consisting of a 6 physical address and length. The first entry is the address and 7 length of the controller register set. The second entry is the 8 address and length of the Slave DMA data port. 9 - reg-names: should contain "reg" and "sdma" 10 - #address-cells: should be 1. The cell encodes the chip select connection. 11 - #size-cells : should be 0. 12 - interrupts : The interrupt number. 13 - clocks: phandle of the controller core clock (nf_clk). 14 15Optional properties: 16 - dmas: shall reference DMA channel associated to the NAND controller 17 - cdns,board-delay-ps : Estimated Board delay. The value includes the total 18 round trip delay for the signals and is used for deciding on values 19 associated with data read capture. The example formula for SDR mode is 20 the following: 21 board delay = RE#PAD delay + PCB trace to device + PCB trace from device 22 + DQ PAD delay 23 24Child nodes represent the available NAND chips. 25 26Required properties of NAND chips: 27 - reg: shall contain the native Chip Select ids from 0 to max supported by 28 the cadence nand flash controller 29 30See Documentation/devicetree/bindings/mtd/nand-controller.yaml for more details on 31generic bindings. 32 33Example: 34 35nand_controller: nand-controller@60000000 { 36 compatible = "cdns,hp-nfc"; 37 #address-cells = <1>; 38 #size-cells = <0>; 39 reg = <0x60000000 0x10000>, <0x80000000 0x10000>; 40 reg-names = "reg", "sdma"; 41 clocks = <&nf_clk>; 42 cdns,board-delay-ps = <4830>; 43 interrupts = <2 0>; 44 nand@0 { 45 reg = <0>; 46 label = "nand-1"; 47 }; 48 nand@1 { 49 reg = <1>; 50 label = "nand-2"; 51 }; 52 53};