cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

asix,ax88796c.yaml (1672B)

      1# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
      2%YAML 1.2
      3---
      4$id: http://devicetree.org/schemas/net/asix,ax88796c.yaml#
      5$schema: http://devicetree.org/meta-schemas/core.yaml#
      6
      7title: ASIX AX88796C SPI Ethernet Adapter
      8
      9maintainers:
     10  - Łukasz Stelmach <l.stelmach@samsung.com>
     11
     12description: |
     13  ASIX AX88796C is an Ethernet controller with a built in PHY. This
     14  describes SPI mode of the chip.
     15
     16  The node for this driver must be a child node of an SPI controller,
     17  hence all mandatory properties described in
     18  ../spi/spi-controller.yaml must be specified.
     19
     20allOf:
     21  - $ref: ethernet-controller.yaml#
     22
     23properties:
     24  compatible:
     25    const: asix,ax88796c
     26
     27  reg:
     28    maxItems: 1
     29
     30  spi-max-frequency:
     31    maximum: 40000000
     32
     33  interrupts:
     34    maxItems: 1
     35
     36  reset-gpios:
     37    description:
     38      A GPIO line handling reset of the chip. As the line is active low,
     39      it should be marked GPIO_ACTIVE_LOW.
     40    maxItems: 1
     41
     42  local-mac-address: true
     43
     44  mac-address: true
     45
     46required:
     47  - compatible
     48  - reg
     49  - spi-max-frequency
     50  - interrupts
     51  - reset-gpios
     52
     53additionalProperties: false
     54
     55examples:
     56  # Artik5 eval board
     57  - |
     58    #include <dt-bindings/interrupt-controller/irq.h>
     59    #include <dt-bindings/gpio/gpio.h>
     60    spi0 {
     61        #address-cells = <1>;
     62        #size-cells = <0>;
     63
     64        ethernet@0 {
     65            compatible = "asix,ax88796c";
     66            reg = <0x0>;
     67            local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */
     68            interrupt-parent = <&gpx2>;
     69            interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
     70            spi-max-frequency = <40000000>;
     71            reset-gpios = <&gpe0 2 GPIO_ACTIVE_LOW>;
     72        };
     73    };