microchip,mcp251x.txt (1000B)
1* Microchip MCP251X stand-alone CAN controller device tree bindings 2 3Required properties: 4 - compatible: Should be one of the following: 5 - "microchip,mcp2510" for MCP2510. 6 - "microchip,mcp2515" for MCP2515. 7 - "microchip,mcp25625" for MCP25625. 8 - reg: SPI chip select. 9 - clocks: The clock feeding the CAN controller. 10 - interrupts: Should contain IRQ line for the CAN controller. 11 12Optional properties: 13 - vdd-supply: Regulator that powers the CAN controller. 14 - xceiver-supply: Regulator that powers the CAN transceiver. 15 - gpio-controller: Indicates this device is a GPIO controller. 16 - #gpio-cells: Should be two. The first cell is the pin number and 17 the second cell is used to specify the gpio polarity. 18 19Example: 20 can0: can@1 { 21 compatible = "microchip,mcp2515"; 22 reg = <1>; 23 clocks = <&clk24m>; 24 interrupt-parent = <&gpio4>; 25 interrupts = <13 IRQ_TYPE_LEVEL_LOW>; 26 vdd-supply = <®5v0>; 27 xceiver-supply = <®5v0>; 28 gpio-controller; 29 #gpio-cells = <2>; 30 };