microchip,mcp251xfd.yaml (1907B)
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/net/can/microchip,mcp251xfd.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: 8 Microchip MCP2517FD, MCP2518FD and MCP251863 stand-alone CAN 9 controller device tree bindings 10 11maintainers: 12 - Marc Kleine-Budde <mkl@pengutronix.de> 13 14allOf: 15 - $ref: can-controller.yaml# 16 17properties: 18 compatible: 19 oneOf: 20 - enum: 21 - microchip,mcp2517fd 22 - microchip,mcp2518fd 23 - microchip,mcp251xfd 24 - items: 25 - enum: 26 - microchip,mcp251863 27 - const: microchip,mcp2518fd 28 reg: 29 maxItems: 1 30 31 interrupts: 32 maxItems: 1 33 34 clocks: 35 maxItems: 1 36 37 vdd-supply: 38 description: Regulator that powers the CAN controller. 39 40 xceiver-supply: 41 description: Regulator that powers the CAN transceiver. 42 43 microchip,rx-int-gpios: 44 description: 45 GPIO phandle of GPIO connected to to INT1 pin of the MCP251XFD, which 46 signals a pending RX interrupt. 47 maxItems: 1 48 49 spi-max-frequency: 50 description: 51 Must be half or less of "clocks" frequency. 52 maximum: 20000000 53 54required: 55 - compatible 56 - reg 57 - interrupts 58 - clocks 59 60additionalProperties: false 61 62examples: 63 - | 64 #include <dt-bindings/gpio/gpio.h> 65 #include <dt-bindings/interrupt-controller/irq.h> 66 67 spi0 { 68 #address-cells = <1>; 69 #size-cells = <0>; 70 71 can@0 { 72 compatible = "microchip,mcp251xfd"; 73 reg = <0>; 74 clocks = <&can0_osc>; 75 pinctrl-names = "default"; 76 pinctrl-0 = <&can0_pins>; 77 spi-max-frequency = <20000000>; 78 interrupts-extended = <&gpio 13 IRQ_TYPE_LEVEL_LOW>; 79 microchip,rx-int-gpios = <&gpio 27 GPIO_ACTIVE_LOW>; 80 vdd-supply = <®5v0>; 81 xceiver-supply = <®5v0>; 82 }; 83 };