cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

qcom,ethqos.txt (1540B)

      1Qualcomm Ethernet ETHQOS device
      2
      3This documents dwmmac based ethernet device which supports Gigabit
      4ethernet for version v2.3.0 onwards.
      5
      6This device has following properties:
      7
      8Required properties:
      9
     10- compatible: Should be one of:
     11		"qcom,qcs404-ethqos"
     12		"qcom,sm8150-ethqos"
     13
     14- reg: Address and length of the register set for the device
     15
     16- reg-names: Should contain register names "stmmaceth", "rgmii"
     17
     18- clocks: Should contain phandle to clocks
     19
     20- clock-names: Should contain clock names "stmmaceth", "pclk",
     21		"ptp_ref", "rgmii"
     22
     23- interrupts: Should contain phandle to interrupts
     24
     25- interrupt-names: Should contain interrupt names "macirq", "eth_lpi"
     26
     27Rest of the properties are defined in stmmac.txt file in same directory
     28
     29
     30Example:
     31
     32ethernet: ethernet@7a80000 {
     33	compatible = "qcom,qcs404-ethqos";
     34	reg = <0x07a80000 0x10000>,
     35		<0x07a96000 0x100>;
     36	reg-names = "stmmaceth", "rgmii";
     37	clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
     38	clocks = <&gcc GCC_ETH_AXI_CLK>,
     39		<&gcc GCC_ETH_SLAVE_AHB_CLK>,
     40		<&gcc GCC_ETH_PTP_CLK>,
     41		<&gcc GCC_ETH_RGMII_CLK>;
     42	interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
     43			<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
     44	interrupt-names = "macirq", "eth_lpi";
     45	snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>;
     46	snps,reset-active-low;
     47
     48	snps,txpbl = <8>;
     49	snps,rxpbl = <2>;
     50	snps,aal;
     51	snps,tso;
     52
     53	phy-handle = <&phy1>;
     54	phy-mode = "rgmii";
     55
     56	mdio {
     57		#address-cells = <0x1>;
     58		#size-cells = <0x0>;
     59		compatible = "snps,dwmac-mdio";
     60		phy1: phy@4 {
     61			device_type = "ethernet-phy";
     62			reg = <0x4>;
     63		};
     64	};
     65
     66};