qualcomm-bluetooth.yaml (4405B)
1# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/net/qualcomm-bluetooth.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Qualcomm Bluetooth Chips 8 9maintainers: 10 - Balakrishna Godavarthi <bgodavar@codeaurora.org> 11 - Rocky Liao <rjliao@codeaurora.org> 12 13description: 14 This binding describes Qualcomm UART-attached bluetooth chips. 15 16properties: 17 compatible: 18 enum: 19 - qcom,qca6174-bt 20 - qcom,qca9377-bt 21 - qcom,wcn3990-bt 22 - qcom,wcn3991-bt 23 - qcom,wcn3998-bt 24 - qcom,qca6390-bt 25 - qcom,wcn6750-bt 26 27 enable-gpios: 28 maxItems: 1 29 description: gpio specifier used to enable chip 30 31 swctrl-gpios: 32 maxItems: 1 33 description: gpio specifier is used to find status 34 of clock supply to SoC 35 36 clocks: 37 maxItems: 1 38 description: clock provided to the controller (SUSCLK_32KHZ) 39 40 vddio-supply: 41 description: VDD_IO supply regulator handle 42 43 vddxo-supply: 44 description: VDD_XO supply regulator handle 45 46 vddrf-supply: 47 description: VDD_RF supply regulator handle 48 49 vddch0-supply: 50 description: VDD_CH0 supply regulator handle 51 52 vddaon-supply: 53 description: VDD_AON supply regulator handle 54 55 vddbtcxmx-supply: 56 description: VDD_BT_CXMX supply regulator handle 57 58 vddrfacmn-supply: 59 description: VDD_RFA_CMN supply regulator handle 60 61 vddrfa0p8-supply: 62 description: VDD_RFA_0P8 suppply regulator handle 63 64 vddrfa1p7-supply: 65 description: VDD_RFA_1P7 supply regulator handle 66 67 vddrfa1p2-supply: 68 description: VDD_RFA_1P2 supply regulator handle 69 70 vddrfa2p2-supply: 71 description: VDD_RFA_2P2 supply regulator handle 72 73 vddasd-supply: 74 description: VDD_ASD supply regulator handle 75 76 max-speed: 77 description: see Documentation/devicetree/bindings/serial/serial.yaml 78 79 firmware-name: 80 description: specify the name of nvm firmware to load 81 82 local-bd-address: 83 description: see Documentation/devicetree/bindings/net/bluetooth.txt 84 85 86required: 87 - compatible 88 89additionalProperties: false 90 91allOf: 92 - if: 93 properties: 94 compatible: 95 contains: 96 enum: 97 - qcom,qca6174-bt 98 then: 99 required: 100 - enable-gpios 101 - clocks 102 103 - if: 104 properties: 105 compatible: 106 contains: 107 enum: 108 - qcom,wcn3990-bt 109 - qcom,wcn3991-bt 110 - qcom,wcn3998-bt 111 then: 112 required: 113 - vddio-supply 114 - vddxo-supply 115 - vddrf-supply 116 - vddch0-supply 117 118 - if: 119 properties: 120 compatible: 121 contains: 122 enum: 123 - qcom,wcn6750-bt 124 then: 125 required: 126 - enable-gpios 127 - swctrl-gpios 128 - vddio-supply 129 - vddaon-supply 130 - vddbtcxmx-supply 131 - vddrfacmn-supply 132 - vddrfa0p8-supply 133 - vddrfa1p7-supply 134 - vddrfa1p2-supply 135 - vddasd-supply 136 137examples: 138 - | 139 #include <dt-bindings/gpio/gpio.h> 140 serial { 141 142 bluetooth { 143 compatible = "qcom,qca6174-bt"; 144 enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; 145 clocks = <&divclk4>; 146 firmware-name = "nvm_00440302.bin"; 147 }; 148 }; 149 - | 150 serial { 151 152 bluetooth { 153 compatible = "qcom,wcn3990-bt"; 154 vddio-supply = <&vreg_s4a_1p8>; 155 vddxo-supply = <&vreg_l7a_1p8>; 156 vddrf-supply = <&vreg_l17a_1p3>; 157 vddch0-supply = <&vreg_l25a_3p3>; 158 max-speed = <3200000>; 159 firmware-name = "crnv21.bin"; 160 }; 161 }; 162 - | 163 serial { 164 165 bluetooth { 166 compatible = "qcom,wcn6750-bt"; 167 pinctrl-names = "default"; 168 pinctrl-0 = <&bt_en_default>; 169 enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>; 170 swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>; 171 vddio-supply = <&vreg_l19b_1p8>; 172 vddaon-supply = <&vreg_s7b_0p9>; 173 vddbtcxmx-supply = <&vreg_s7b_0p9>; 174 vddrfacmn-supply = <&vreg_s7b_0p9>; 175 vddrfa0p8-supply = <&vreg_s7b_0p9>; 176 vddrfa1p7-supply = <&vreg_s1b_1p8>; 177 vddrfa1p2-supply = <&vreg_s8b_1p2>; 178 vddrfa2p2-supply = <&vreg_s1c_2p2>; 179 vddasd-supply = <&vreg_l11c_2p8>; 180 max-speed = <3200000>; 181 firmware-name = "msnv11.bin"; 182 }; 183 };