cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

smsc,lan9115.yaml (2684B)

      1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
      2%YAML 1.2
      3---
      4$id: http://devicetree.org/schemas/net/smsc,lan9115.yaml#
      5$schema: http://devicetree.org/meta-schemas/core.yaml#
      6
      7title: Smart Mixed-Signal Connectivity (SMSC) LAN911x/912x Controller
      8
      9maintainers:
     10  - Shawn Guo <shawnguo@kernel.org>
     11
     12allOf:
     13  - $ref: ethernet-controller.yaml#
     14
     15properties:
     16  compatible:
     17    oneOf:
     18      - const: smsc,lan9115
     19      - items:
     20          - enum:
     21              - smsc,lan89218
     22              - smsc,lan9117
     23              - smsc,lan9118
     24              - smsc,lan9220
     25              - smsc,lan9221
     26          - const: smsc,lan9115
     27
     28  reg:
     29    maxItems: 1
     30
     31  reg-shift: true
     32
     33  reg-io-width:
     34    enum: [ 2, 4 ]
     35    default: 2
     36
     37  interrupts:
     38    minItems: 1
     39    items:
     40      - description:
     41          LAN interrupt line
     42      - description:
     43          Optional PME (power management event) interrupt that is able to wake
     44          up the host system with a 50ms pulse on network activity
     45
     46  clocks:
     47    maxItems: 1
     48
     49  phy-mode: true
     50
     51  smsc,irq-active-high:
     52    type: boolean
     53    description: Indicates the IRQ polarity is active-high
     54
     55  smsc,irq-push-pull:
     56    type: boolean
     57    description: Indicates the IRQ type is push-pull
     58
     59  smsc,force-internal-phy:
     60    type: boolean
     61    description: Forces SMSC LAN controller to use internal PHY
     62
     63  smsc,force-external-phy:
     64    type: boolean
     65    description: Forces SMSC LAN controller to use external PHY
     66
     67  smsc,save-mac-address:
     68    type: boolean
     69    description:
     70      Indicates that MAC address needs to be saved before resetting the
     71      controller
     72
     73  reset-gpios:
     74    maxItems: 1
     75    description:
     76      A GPIO line connected to the RESET (active low) signal of the device.
     77      On many systems this is wired high so the device goes out of reset at
     78      power-on, but if it is under program control, this optional GPIO can
     79      wake up in response to it.
     80
     81  vdd33a-supply:
     82    description: 3.3V analog power supply
     83
     84  vddvario-supply:
     85    description: IO logic power supply
     86
     87required:
     88  - compatible
     89  - reg
     90  - interrupts
     91
     92# There are lots of bus-specific properties ("qcom,*", "samsung,*", "fsl,*",
     93# "gpmc,*", ...) to be found, that actually depend on the compatible value of
     94# the parent node.
     95additionalProperties: true
     96
     97examples:
     98  - |
     99    #include <dt-bindings/gpio/gpio.h>
    100
    101    ethernet@f4000000 {
    102            compatible = "smsc,lan9220", "smsc,lan9115";
    103            reg = <0xf4000000 0x2000000>;
    104            phy-mode = "mii";
    105            interrupt-parent = <&gpio1>;
    106            interrupts = <31>, <32>;
    107            reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
    108            reg-io-width = <4>;
    109            smsc,irq-push-pull;
    110    };