cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

ti,dp83822.yaml (2527B)

      1# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
      2# Copyright (C) 2020 Texas Instruments Incorporated
      3%YAML 1.2
      4---
      5$id: "http://devicetree.org/schemas/net/ti,dp83822.yaml#"
      6$schema: "http://devicetree.org/meta-schemas/core.yaml#"
      7
      8title: TI DP83822 ethernet PHY
      9
     10maintainers:
     11  - Dan Murphy <dmurphy@ti.com>
     12
     13description: |
     14  The DP83822 is a low-power, single-port, 10/100 Mbps Ethernet PHY. It
     15  provides all of the physical layer functions needed to transmit and receive
     16  data over standard, twisted-pair cables or to connect to an external,
     17  fiber-optic transceiver. Additionally, the DP83822 provides flexibility to
     18  connect to a MAC through a standard MII, RMII, or RGMII interface
     19
     20  Specifications about the Ethernet PHY can be found at:
     21    http://www.ti.com/lit/ds/symlink/dp83822i.pdf
     22
     23allOf:
     24  - $ref: "ethernet-phy.yaml#"
     25
     26properties:
     27  reg:
     28    maxItems: 1
     29
     30  ti,link-loss-low:
     31    type: boolean
     32    description: |
     33       DP83822 PHY in Fiber mode only.
     34       Sets the DP83822 to detect a link drop condition when the signal goes
     35       high.  If not set then link drop will occur when the signal goes low.
     36       This property is only applicable if the fiber mode support is strapped
     37       to on.
     38
     39  ti,fiber-mode:
     40    type: boolean
     41    description: |
     42       DP83822 PHY only.
     43       If present the DP83822 PHY is configured to operate in fiber mode
     44       Fiber mode support can also be strapped. If the strap pin is not set
     45       correctly or not set at all then this boolean can be used to enable it.
     46       If the fiber mode is not strapped then signal detection for the PHY
     47       is disabled.
     48       In fiber mode, auto-negotiation is disabled and the PHY can only work in
     49       100base-fx (full and half duplex) modes.
     50
     51  rx-internal-delay-ps:
     52    description: |
     53       DP83822 PHY only.
     54       Setting this property to a non-zero number sets the RX internal delay
     55       for the PHY.  The internal delay for the PHY is fixed to 3.5ns relative
     56       to receive data.
     57
     58  tx-internal-delay-ps:
     59    description: |
     60       DP83822 PHY only.
     61       Setting this property to a non-zero number sets the TX internal delay
     62       for the PHY.  The internal delay for the PHY is fixed to 3.5ns relative
     63       to transmit data.
     64
     65required:
     66  - reg
     67
     68unevaluatedProperties: false
     69
     70examples:
     71  - |
     72    mdio0 {
     73      #address-cells = <1>;
     74      #size-cells = <0>;
     75      ethphy0: ethernet-phy@0 {
     76        reg = <0>;
     77        rx-internal-delay-ps = <1>;
     78        tx-internal-delay-ps = <1>;
     79      };
     80    };
     81
     82...