opp-v2-kryo-cpu.yaml (7519B)
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/opp/opp-v2-kryo-cpu.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Qualcomm Technologies, Inc. NVMEM OPP bindings 8 9maintainers: 10 - Ilia Lin <ilia.lin@kernel.org> 11 12allOf: 13 - $ref: opp-v2-base.yaml# 14 15description: | 16 In certain Qualcomm Technologies, Inc. SoCs like APQ8096 and MSM8996, 17 the CPU frequencies subset and voltage value of each OPP varies based on 18 the silicon variant in use. 19 Qualcomm Technologies, Inc. Process Voltage Scaling Tables 20 defines the voltage and frequency value based on the speedbin blown in 21 the efuse combination. 22 The qcom-cpufreq-nvmem driver reads the efuse value from the SoC to provide 23 the OPP framework with required information (existing HW bitmap). 24 This is used to determine the voltage and frequency value for each OPP of 25 operating-points-v2 table when it is parsed by the OPP framework. 26 27properties: 28 compatible: 29 const: operating-points-v2-kryo-cpu 30 31 nvmem-cells: 32 description: | 33 A phandle pointing to a nvmem-cells node representing the 34 efuse registers that has information about the 35 speedbin that is used to select the right frequency/voltage 36 value pair. 37 38 opp-shared: true 39 40patternProperties: 41 '^opp-?[0-9]+$': 42 type: object 43 44 properties: 45 opp-hz: true 46 47 opp-microvolt: true 48 49 opp-supported-hw: 50 description: | 51 A single 32 bit bitmap value, representing compatible HW. 52 Bitmap: 53 0: MSM8996, speedbin 0 54 1: MSM8996, speedbin 1 55 2: MSM8996, speedbin 2 56 3-31: unused 57 maximum: 0x7 58 59 clock-latency-ns: true 60 61 required-opps: true 62 63 required: 64 - opp-hz 65 66required: 67 - compatible 68 69if: 70 required: 71 - nvmem-cells 72then: 73 patternProperties: 74 '^opp-?[0-9]+$': 75 required: 76 - opp-supported-hw 77 78additionalProperties: false 79 80examples: 81 - | 82 / { 83 model = "Qualcomm Technologies, Inc. DB820c"; 84 compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc", "qcom,apq8096"; 85 #address-cells = <2>; 86 #size-cells = <2>; 87 88 cpus { 89 #address-cells = <2>; 90 #size-cells = <0>; 91 92 CPU0: cpu@0 { 93 device_type = "cpu"; 94 compatible = "qcom,kryo"; 95 reg = <0x0 0x0>; 96 enable-method = "psci"; 97 cpu-idle-states = <&CPU_SLEEP_0>; 98 capacity-dmips-mhz = <1024>; 99 clocks = <&kryocc 0>; 100 operating-points-v2 = <&cluster0_opp>; 101 #cooling-cells = <2>; 102 next-level-cache = <&L2_0>; 103 L2_0: l2-cache { 104 compatible = "cache"; 105 cache-level = <2>; 106 }; 107 }; 108 109 CPU1: cpu@1 { 110 device_type = "cpu"; 111 compatible = "qcom,kryo"; 112 reg = <0x0 0x1>; 113 enable-method = "psci"; 114 cpu-idle-states = <&CPU_SLEEP_0>; 115 capacity-dmips-mhz = <1024>; 116 clocks = <&kryocc 0>; 117 operating-points-v2 = <&cluster0_opp>; 118 #cooling-cells = <2>; 119 next-level-cache = <&L2_0>; 120 }; 121 122 CPU2: cpu@100 { 123 device_type = "cpu"; 124 compatible = "qcom,kryo"; 125 reg = <0x0 0x100>; 126 enable-method = "psci"; 127 cpu-idle-states = <&CPU_SLEEP_0>; 128 capacity-dmips-mhz = <1024>; 129 clocks = <&kryocc 1>; 130 operating-points-v2 = <&cluster1_opp>; 131 #cooling-cells = <2>; 132 next-level-cache = <&L2_1>; 133 L2_1: l2-cache { 134 compatible = "cache"; 135 cache-level = <2>; 136 }; 137 }; 138 139 CPU3: cpu@101 { 140 device_type = "cpu"; 141 compatible = "qcom,kryo"; 142 reg = <0x0 0x101>; 143 enable-method = "psci"; 144 cpu-idle-states = <&CPU_SLEEP_0>; 145 capacity-dmips-mhz = <1024>; 146 clocks = <&kryocc 1>; 147 operating-points-v2 = <&cluster1_opp>; 148 #cooling-cells = <2>; 149 next-level-cache = <&L2_1>; 150 }; 151 152 cpu-map { 153 cluster0 { 154 core0 { 155 cpu = <&CPU0>; 156 }; 157 158 core1 { 159 cpu = <&CPU1>; 160 }; 161 }; 162 163 cluster1 { 164 core0 { 165 cpu = <&CPU2>; 166 }; 167 168 core1 { 169 cpu = <&CPU3>; 170 }; 171 }; 172 }; 173 }; 174 175 cluster0_opp: opp-table-0 { 176 compatible = "operating-points-v2-kryo-cpu"; 177 nvmem-cells = <&speedbin_efuse>; 178 opp-shared; 179 180 opp-307200000 { 181 opp-hz = /bits/ 64 <307200000>; 182 opp-microvolt = <905000 905000 1140000>; 183 opp-supported-hw = <0x7>; 184 clock-latency-ns = <200000>; 185 }; 186 opp-1401600000 { 187 opp-hz = /bits/ 64 <1401600000>; 188 opp-microvolt = <1140000 905000 1140000>; 189 opp-supported-hw = <0x5>; 190 clock-latency-ns = <200000>; 191 }; 192 opp-1593600000 { 193 opp-hz = /bits/ 64 <1593600000>; 194 opp-microvolt = <1140000 905000 1140000>; 195 opp-supported-hw = <0x1>; 196 clock-latency-ns = <200000>; 197 }; 198 }; 199 200 cluster1_opp: opp-table-1 { 201 compatible = "operating-points-v2-kryo-cpu"; 202 nvmem-cells = <&speedbin_efuse>; 203 opp-shared; 204 205 opp-307200000 { 206 opp-hz = /bits/ 64 <307200000>; 207 opp-microvolt = <905000 905000 1140000>; 208 opp-supported-hw = <0x7>; 209 clock-latency-ns = <200000>; 210 }; 211 opp-1804800000 { 212 opp-hz = /bits/ 64 <1804800000>; 213 opp-microvolt = <1140000 905000 1140000>; 214 opp-supported-hw = <0x6>; 215 clock-latency-ns = <200000>; 216 }; 217 opp-1900800000 { 218 opp-hz = /bits/ 64 <1900800000>; 219 opp-microvolt = <1140000 905000 1140000>; 220 opp-supported-hw = <0x4>; 221 clock-latency-ns = <200000>; 222 }; 223 opp-2150400000 { 224 opp-hz = /bits/ 64 <2150400000>; 225 opp-microvolt = <1140000 905000 1140000>; 226 opp-supported-hw = <0x1>; 227 clock-latency-ns = <200000>; 228 }; 229 }; 230 231 smem { 232 compatible = "qcom,smem"; 233 memory-region = <&smem_mem>; 234 hwlocks = <&tcsr_mutex 3>; 235 }; 236 237 soc { 238 #address-cells = <1>; 239 #size-cells = <1>; 240 241 qfprom: qfprom@74000 { 242 compatible = "qcom,msm8996-qfprom", "qcom,qfprom"; 243 reg = <0x00074000 0x8ff>; 244 #address-cells = <1>; 245 #size-cells = <1>; 246 247 speedbin_efuse: speedbin@133 { 248 reg = <0x133 0x1>; 249 bits = <5 3>; 250 }; 251 }; 252 }; 253 };