cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

axis,artpec6-pcie.txt (1977B)


      1* Axis ARTPEC-6 PCIe interface
      2
      3This PCIe host controller is based on the Synopsys DesignWare PCIe IP
      4and thus inherits all the common properties defined in snps,dw-pcie.yaml.
      5
      6Required properties:
      7- compatible: "axis,artpec6-pcie", "snps,dw-pcie" for ARTPEC-6 in RC mode;
      8	      "axis,artpec6-pcie-ep", "snps,dw-pcie" for ARTPEC-6 in EP mode;
      9	      "axis,artpec7-pcie", "snps,dw-pcie" for ARTPEC-7 in RC mode;
     10	      "axis,artpec7-pcie-ep", "snps,dw-pcie" for ARTPEC-7 in EP mode;
     11- reg: base addresses and lengths of the PCIe controller (DBI),
     12	the PHY controller, and configuration address space.
     13- reg-names: Must include the following entries:
     14	- "dbi"
     15	- "phy"
     16	- "config"
     17- interrupts: A list of interrupt outputs of the controller. Must contain an
     18  entry for each entry in the interrupt-names property.
     19- interrupt-names: Must include the following entries:
     20	- "msi": The interrupt that is asserted when an MSI is received
     21- axis,syscon-pcie: A phandle pointing to the ARTPEC-6 system controller,
     22	used to enable and control the Synopsys IP.
     23
     24Example:
     25
     26	pcie@f8050000 {
     27		compatible = "axis,artpec6-pcie", "snps,dw-pcie";
     28		reg = <0xf8050000 0x2000
     29		       0xf8040000 0x1000
     30		       0xc0000000 0x2000>;
     31		reg-names = "dbi", "phy", "config";
     32		#address-cells = <3>;
     33		#size-cells = <2>;
     34		device_type = "pci";
     35			  /* downstream I/O */
     36		ranges = <0x81000000 0 0 0xc0002000 0 0x00010000
     37			  /* non-prefetchable memory */
     38			  0x82000000 0 0xc0012000 0xc0012000 0 0x1ffee000>;
     39		num-lanes = <2>;
     40		bus-range = <0x00 0xff>;
     41		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
     42		interrupt-names = "msi";
     43		#interrupt-cells = <1>;
     44		interrupt-map-mask = <0 0 0 0x7>;
     45		interrupt-map = <0 0 0 1 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
     46		                <0 0 0 2 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
     47		                <0 0 0 3 &intc GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
     48		                <0 0 0 4 &intc GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
     49		axis,syscon-pcie = <&syscon>;
     50	};