mobiveil-pcie.txt (2485B)
1* Mobiveil AXI PCIe Root Port Bridge DT description 2 3Mobiveil's GPEX 4.0 is a PCIe Gen4 root port bridge IP. This configurable IP 4has up to 8 outbound and inbound windows for the address translation. 5 6Required properties: 7- #address-cells: Address representation for root ports, set to <3> 8- #size-cells: Size representation for root ports, set to <2> 9- #interrupt-cells: specifies the number of cells needed to encode an 10 interrupt source. The value must be 1. 11- compatible: Should contain "mbvl,gpex40-pcie" 12- reg: Should contain PCIe registers location and length 13 Mandatory: 14 "config_axi_slave": PCIe controller registers 15 "csr_axi_slave" : Bridge config registers 16 Optional: 17 "gpio_slave" : GPIO registers to control slot power 18 "apb_csr" : MSI registers 19 20- device_type: must be "pci" 21- apio-wins : number of requested apio outbound windows 22 default 2 outbound windows are configured - 23 1. Config window 24 2. Memory window 25- ppio-wins : number of requested ppio inbound windows 26 default 1 inbound memory window is configured. 27- bus-range: PCI bus numbers covered 28- interrupt-controller: identifies the node as an interrupt controller 29- #interrupt-cells: specifies the number of cells needed to encode an 30 interrupt source. The value must be 1. 31- interrupts: The interrupt line of the PCIe controller 32 last cell of this field is set to 4 to 33 denote it as IRQ_TYPE_LEVEL_HIGH type interrupt. 34- interrupt-map-mask, 35 interrupt-map: standard PCI properties to define the mapping of the 36 PCI interface to interrupt numbers. 37- ranges: ranges for the PCI memory regions (I/O space region is not 38 supported by hardware) 39 Please refer to the standard PCI bus binding document for a more 40 detailed explanation 41 42 43Example: 44++++++++ 45 pcie0: pcie@a0000000 { 46 #address-cells = <3>; 47 #size-cells = <2>; 48 compatible = "mbvl,gpex40-pcie"; 49 reg = <0xa0000000 0x00001000>, 50 <0xb0000000 0x00010000>, 51 <0xff000000 0x00200000>, 52 <0xb0010000 0x00001000>; 53 reg-names = "config_axi_slave", 54 "csr_axi_slave", 55 "gpio_slave", 56 "apb_csr"; 57 device_type = "pci"; 58 apio-wins = <2>; 59 ppio-wins = <1>; 60 bus-range = <0x00000000 0x000000ff>; 61 interrupt-controller; 62 interrupt-parent = <&gic>; 63 #interrupt-cells = <1>; 64 interrupts = < 0 89 4 >; 65 interrupt-map-mask = <0 0 0 7>; 66 interrupt-map = <0 0 0 0 &pci_express 0>, 67 <0 0 0 1 &pci_express 1>, 68 <0 0 0 2 &pci_express 2>, 69 <0 0 0 3 &pci_express 3>; 70 ranges = < 0x83000000 0 0x00000000 0xa8000000 0 0x8000000>; 71 72 };