pci-armada8k.txt (1694B)
1* Marvell Armada 7K/8K PCIe interface 2 3This PCIe host controller is based on the Synopsys DesignWare PCIe IP 4and thus inherits all the common properties defined in snps,dw-pcie.yaml. 5 6Required properties: 7- compatible: "marvell,armada8k-pcie" 8- reg: must contain two register regions 9 - the control register region 10 - the config space region 11- reg-names: 12 - "ctrl" for the control register region 13 - "config" for the config space region 14- interrupts: Interrupt specifier for the PCIe controller 15- clocks: reference to the PCIe controller clocks 16- clock-names: mandatory if there is a second clock, in this case the 17 name must be "core" for the first clock and "reg" for the second 18 one 19 20Optional properties: 21- phys: phandle(s) to PHY node(s) following the generic PHY bindings. 22 Either 1, 2 or 4 PHYs might be needed depending on the number of 23 PCIe lanes. 24- phy-names: names of the PHYs corresponding to the number of lanes. 25 Must be "cp0-pcie0-x4-lane0-phy", "cp0-pcie0-x4-lane1-phy" for 26 2 PHYs. 27 28Example: 29 30 pcie@f2600000 { 31 compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; 32 reg = <0 0xf2600000 0 0x10000>, <0 0xf6f00000 0 0x80000>; 33 reg-names = "ctrl", "config"; 34 #address-cells = <3>; 35 #size-cells = <2>; 36 #interrupt-cells = <1>; 37 device_type = "pci"; 38 dma-coherent; 39 40 bus-range = <0 0xff>; 41 ranges = <0x81000000 0 0xf9000000 0 0xf9000000 0 0x10000 /* downstream I/O */ 42 0x82000000 0 0xf6000000 0 0xf6000000 0 0xf00000>; /* non-prefetchable memory */ 43 interrupt-map-mask = <0 0 0 0>; 44 interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; 45 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; 46 num-lanes = <1>; 47 clocks = <&cpm_syscon0 1 13>; 48 };