xgene-pci.txt (1888B)
1* AppliedMicro X-Gene PCIe interface 2 3Required properties: 4- device_type: set to "pci" 5- compatible: should contain "apm,xgene-pcie" to identify the core. 6- reg: A list of physical base address and length for each set of controller 7 registers. Must contain an entry for each entry in the reg-names 8 property. 9- reg-names: Must include the following entries: 10 "csr": controller configuration registers. 11 "cfg": PCIe configuration space registers. 12- #address-cells: set to <3> 13- #size-cells: set to <2> 14- ranges: ranges for the outbound memory, I/O regions. 15- dma-ranges: ranges for the inbound memory regions. 16- #interrupt-cells: set to <1> 17- interrupt-map-mask and interrupt-map: standard PCI properties 18 to define the mapping of the PCIe interface to interrupt 19 numbers. 20- clocks: from common clock binding: handle to pci clock. 21 22Optional properties: 23- status: Either "ok" or "disabled". 24- dma-coherent: Present if DMA operations are coherent 25 26Example: 27 28 pcie0: pcie@1f2b0000 { 29 status = "disabled"; 30 device_type = "pci"; 31 compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; 32 #interrupt-cells = <1>; 33 #size-cells = <2>; 34 #address-cells = <3>; 35 reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */ 36 0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */ 37 reg-names = "csr", "cfg"; 38 ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000 /* io */ 39 0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */ 40 dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 41 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; 42 interrupt-map-mask = <0x0 0x0 0x0 0x7>; 43 interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1 44 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1 45 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1 46 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>; 47 dma-coherent; 48 clocks = <&pcie0clk 0>; 49 }; 50