xilinx-nwl-pcie.txt (2876B)
1* Xilinx NWL PCIe Root Port Bridge DT description 2 3Required properties: 4- compatible: Should contain "xlnx,nwl-pcie-2.11" 5- #address-cells: Address representation for root ports, set to <3> 6- #size-cells: Size representation for root ports, set to <2> 7- #interrupt-cells: specifies the number of cells needed to encode an 8 interrupt source. The value must be 1. 9- reg: Should contain Bridge, PCIe Controller registers location, 10 configuration space, and length 11- reg-names: Must include the following entries: 12 "breg": bridge registers 13 "pcireg": PCIe controller registers 14 "cfg": configuration space region 15- device_type: must be "pci" 16- interrupts: Should contain NWL PCIe interrupt 17- interrupt-names: Must include the following entries: 18 "msi1, msi0": interrupt asserted when an MSI is received 19 "intx": interrupt asserted when a legacy interrupt is received 20 "misc": interrupt asserted when miscellaneous interrupt is received 21- interrupt-map-mask and interrupt-map: standard PCI properties to define the 22 mapping of the PCI interface to interrupt numbers. 23- ranges: ranges for the PCI memory regions (I/O space region is not 24 supported by hardware) 25 Please refer to the standard PCI bus binding document for a more 26 detailed explanation 27- msi-controller: indicates that this is MSI controller node 28- msi-parent: MSI parent of the root complex itself 29- legacy-interrupt-controller: Interrupt controller device node for Legacy 30 interrupts 31 - interrupt-controller: identifies the node as an interrupt controller 32 - #interrupt-cells: should be set to 1 33 - #address-cells: specifies the number of cells needed to encode an 34 address. The value must be 0. 35 36Optional properties: 37- dma-coherent: present if DMA operations are coherent 38- clocks: Input clock specifier. Refer to common clock bindings 39 40Example: 41++++++++ 42 43nwl_pcie: pcie@fd0e0000 { 44 #address-cells = <3>; 45 #size-cells = <2>; 46 compatible = "xlnx,nwl-pcie-2.11"; 47 #interrupt-cells = <1>; 48 msi-controller; 49 device_type = "pci"; 50 interrupt-parent = <&gic>; 51 interrupts = <0 114 4>, <0 115 4>, <0 116 4>, <0 117 4>, <0 118 4>; 52 interrupt-names = "msi0", "msi1", "intx", "dummy", "misc"; 53 interrupt-map-mask = <0x0 0x0 0x0 0x7>; 54 interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>, 55 <0x0 0x0 0x0 0x2 &pcie_intc 0x2>, 56 <0x0 0x0 0x0 0x3 &pcie_intc 0x3>, 57 <0x0 0x0 0x0 0x4 &pcie_intc 0x4>; 58 59 msi-parent = <&nwl_pcie>; 60 reg = <0x0 0xfd0e0000 0x0 0x1000>, 61 <0x0 0xfd480000 0x0 0x1000>, 62 <0x80 0x00000000 0x0 0x1000000>; 63 reg-names = "breg", "pcireg", "cfg"; 64 ranges = <0x02000000 0x00000000 0xe0000000 0x00000000 0xe0000000 0x00000000 0x10000000 /* non-prefetchable memory */ 65 0x43000000 0x00000006 0x00000000 0x00000006 0x00000000 0x00000002 0x00000000>;/* prefetchable memory */ 66 67 pcie_intc: legacy-interrupt-controller { 68 interrupt-controller; 69 #address-cells = <0>; 70 #interrupt-cells = <1>; 71 }; 72 73};