ti,phy-j721e-wiz.yaml (6176B)
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2# Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ 3%YAML 1.2 4--- 5$id: "http://devicetree.org/schemas/phy/ti,phy-j721e-wiz.yaml#" 6$schema: "http://devicetree.org/meta-schemas/core.yaml#" 7 8title: TI J721E WIZ (SERDES Wrapper) 9 10maintainers: 11 - Kishon Vijay Abraham I <kishon@ti.com> 12 13properties: 14 compatible: 15 enum: 16 - ti,j721e-wiz-16g 17 - ti,j721e-wiz-10g 18 - ti,am64-wiz-10g 19 20 power-domains: 21 maxItems: 1 22 23 clocks: 24 maxItems: 3 25 description: clock-specifier to represent input to the WIZ 26 27 clock-names: 28 items: 29 - const: fck 30 - const: core_ref_clk 31 - const: ext_ref_clk 32 33 num-lanes: 34 minimum: 1 35 maximum: 4 36 37 "#address-cells": 38 const: 1 39 40 "#size-cells": 41 const: 1 42 43 "#reset-cells": 44 const: 1 45 46 "#clock-cells": 47 const: 1 48 49 ranges: true 50 51 assigned-clocks: 52 minItems: 1 53 maxItems: 2 54 55 assigned-clock-parents: 56 minItems: 1 57 maxItems: 2 58 59 assigned-clock-rates: 60 minItems: 1 61 maxItems: 2 62 63 typec-dir-gpios: 64 maxItems: 1 65 description: 66 GPIO to signal Type-C cable orientation for lane swap. 67 If GPIO is active, lane 0 and lane 1 of SERDES will be swapped to 68 achieve the funtionality of an external type-C plug flip mux. 69 70 typec-dir-debounce-ms: 71 minimum: 100 72 maximum: 1000 73 default: 100 74 description: 75 Number of milliseconds to wait before sampling typec-dir-gpio. 76 If not specified, the default debounce of 100ms will be used. 77 Type-C spec states minimum CC pin debounce of 100 ms and maximum 78 of 200 ms. However, some solutions might need more than 200 ms. 79 80 refclk-dig: 81 type: object 82 description: | 83 WIZ node should have subnode for refclk_dig to select the reference 84 clock source for the reference clock used in the PHY and PMA digital 85 logic. 86 properties: 87 clocks: 88 minItems: 2 89 maxItems: 4 90 description: Phandle to two (Torrent) or four (Sierra) clock nodes representing 91 the inputs to refclk_dig 92 93 "#clock-cells": 94 const: 0 95 96 assigned-clocks: 97 maxItems: 1 98 99 assigned-clock-parents: 100 maxItems: 1 101 102 required: 103 - clocks 104 - "#clock-cells" 105 - assigned-clocks 106 - assigned-clock-parents 107 108patternProperties: 109 "^pll[0|1]-refclk$": 110 type: object 111 description: | 112 WIZ node should have subnodes for each of the PLLs present in 113 the SERDES. 114 properties: 115 clocks: 116 maxItems: 2 117 description: Phandle to clock nodes representing the two inputs to PLL. 118 119 "#clock-cells": 120 const: 0 121 122 assigned-clocks: 123 maxItems: 1 124 125 assigned-clock-parents: 126 maxItems: 1 127 128 required: 129 - clocks 130 - "#clock-cells" 131 - assigned-clocks 132 - assigned-clock-parents 133 134 "^cmn-refclk1?-dig-div$": 135 type: object 136 description: 137 WIZ node should have subnodes for each of the PMA common refclock 138 provided by the SERDES. 139 properties: 140 clocks: 141 maxItems: 1 142 description: Phandle to the clock node representing the input to the 143 divider clock. 144 145 "#clock-cells": 146 const: 0 147 148 required: 149 - clocks 150 - "#clock-cells" 151 152 "^serdes@[0-9a-f]+$": 153 type: object 154 description: | 155 WIZ node should have '1' subnode for the SERDES. It could be either 156 Sierra SERDES or Torrent SERDES. Sierra SERDES should follow the 157 bindings specified in 158 Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml 159 Torrent SERDES should follow the bindings specified in 160 Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml 161 162required: 163 - compatible 164 - power-domains 165 - clocks 166 - clock-names 167 - num-lanes 168 - "#address-cells" 169 - "#size-cells" 170 - "#reset-cells" 171 - ranges 172 173additionalProperties: false 174 175examples: 176 - | 177 #include <dt-bindings/soc/ti,sci_pm_domain.h> 178 179 wiz@5000000 { 180 compatible = "ti,j721e-wiz-16g"; 181 #address-cells = <1>; 182 #size-cells = <1>; 183 power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>; 184 clocks = <&k3_clks 292 5>, <&k3_clks 292 11>, <&dummy_cmn_refclk>; 185 clock-names = "fck", "core_ref_clk", "ext_ref_clk"; 186 assigned-clocks = <&k3_clks 292 11>, <&k3_clks 292 0>; 187 assigned-clock-parents = <&k3_clks 292 15>, <&k3_clks 292 4>; 188 num-lanes = <2>; 189 #reset-cells = <1>; 190 ranges = <0x5000000 0x5000000 0x10000>; 191 192 pll0-refclk { 193 clocks = <&k3_clks 293 13>, <&dummy_cmn_refclk>; 194 #clock-cells = <0>; 195 assigned-clocks = <&wiz1_pll0_refclk>; 196 assigned-clock-parents = <&k3_clks 293 13>; 197 }; 198 199 pll1-refclk { 200 clocks = <&k3_clks 293 0>, <&dummy_cmn_refclk1>; 201 #clock-cells = <0>; 202 assigned-clocks = <&wiz1_pll1_refclk>; 203 assigned-clock-parents = <&k3_clks 293 0>; 204 }; 205 206 cmn-refclk-dig-div { 207 clocks = <&wiz1_refclk_dig>; 208 #clock-cells = <0>; 209 }; 210 211 cmn-refclk1-dig-div { 212 clocks = <&wiz1_pll1_refclk>; 213 #clock-cells = <0>; 214 }; 215 216 refclk-dig { 217 clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, 218 <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>; 219 #clock-cells = <0>; 220 assigned-clocks = <&wiz0_refclk_dig>; 221 assigned-clock-parents = <&k3_clks 292 11>; 222 }; 223 224 serdes@5000000 { 225 compatible = "ti,sierra-phy-t0"; 226 reg-names = "serdes"; 227 reg = <0x5000000 0x10000>; 228 #address-cells = <1>; 229 #size-cells = <0>; 230 resets = <&serdes_wiz0 0>; 231 reset-names = "sierra_reset"; 232 clocks = <&wiz0_cmn_refclk_dig_div>, <&wiz0_cmn_refclk1_dig_div>; 233 clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div"; 234 }; 235 };