fsl,imx7ulp-pinctrl.txt (1447B)
1* Freescale i.MX7ULP IOMUX Controller 2 3i.MX 7ULP has three IOMUXC instances: IOMUXC0 for M4 ports, IOMUXC1 for A7 4ports and IOMUXC DDR for DDR interface. 5 6Note: 7This binding doc is only for the IOMUXC1 support in A7 Domain and it only 8supports generic pin config. 9 10Please refer to fsl,imx-pinctrl.txt in this directory for common binding 11part and usage. 12 13Required properties: 14- compatible: "fsl,imx7ulp-iomuxc1". 15- fsl,pins: Each entry consists of 5 integers which represents the mux 16 and config setting for one pin. The first 4 integers 17 <mux_conf_reg input_reg mux_mode input_val> are specified 18 using a PIN_FUNC_ID macro, which can be found in 19 imx7ulp-pinfunc.h in the device tree source folder. 20 The last integer CONFIG is the pad setting value like 21 pull-up on this pin. 22 23 Please refer to i.MX7ULP Reference Manual for detailed 24 CONFIG settings. 25 26CONFIG bits definition: 27PAD_CTL_OBE (1 << 17) 28PAD_CTL_IBE (1 << 16) 29PAD_CTL_LK (1 << 16) 30PAD_CTL_DSE_HI (1 << 6) 31PAD_CTL_DSE_STD (0 << 6) 32PAD_CTL_ODE (1 << 5) 33PAD_CTL_PUSH_PULL (0 << 5) 34PAD_CTL_SRE_SLOW (1 << 2) 35PAD_CTL_SRE_STD (0 << 2) 36PAD_CTL_PE (1 << 0) 37 38Examples: 39#include "imx7ulp-pinfunc.h" 40 41/* Pin Controller Node */ 42iomuxc1: pinctrl@40ac0000 { 43 compatible = "fsl,imx7ulp-iomuxc1"; 44 reg = <0x40ac0000 0x1000>; 45 46 /* Pin Configuration Node */ 47 pinctrl_lpuart4: lpuart4grp { 48 fsl,pins = < 49 IMX7ULP_PAD_PTC3__LPUART4_RX 0x1 50 IMX7ULP_PAD_PTC2__LPUART4_TX 0x1 51 >; 52 }; 53};