lantiq,pinctrl-xway.txt (7243B)
1Lantiq XWAY pinmux controller 2 3Required properties: 4- compatible: "lantiq,pinctrl-xway", (DEPRECATED: Use "lantiq,pinctrl-danube") 5 "lantiq,pinctrl-xr9", (DEPRECATED: Use "lantiq,xrx100-pinctrl" or 6 "lantiq,xrx200-pinctrl") 7 "lantiq,pinctrl-ase", (DEPRECATED: Use "lantiq,ase-pinctrl") 8 "lantiq,<chip>-pinctrl", where <chip> is: 9 "ase" (XWAY AMAZON Family) 10 "danube" (XWAY DANUBE Family) 11 "xrx100" (XWAY xRX100 Family) 12 "xrx200" (XWAY xRX200 Family) 13 "xrx300" (XWAY xRX300 Family) 14- reg: Should contain the physical address and length of the gpio/pinmux 15 register range 16 17Please refer to pinctrl-bindings.txt in this directory for details of the 18common pinctrl bindings used by client devices, including the meaning of the 19phrase "pin configuration node". 20 21Lantiq's pin configuration nodes act as a container for an arbitrary number of 22subnodes. Each of these subnodes represents some desired configuration for a 23pin, a group, or a list of pins or groups. This configuration can include the 24mux function to select on those group(s), and two pin configuration parameters: 25pull-up and open-drain 26 27The name of each subnode is not important as long as it is unique; all subnodes 28should be enumerated and processed purely based on their content. 29 30Each subnode only affects those parameters that are explicitly listed. In 31other words, a subnode that lists a mux function but no pin configuration 32parameters implies no information about any pin configuration parameters. 33Similarly, a pin subnode that describes a pullup parameter implies no 34information about e.g. the mux function. 35 36We support 2 types of nodes. 37 38Definition of mux function groups: 39 40Required subnode-properties: 41- lantiq,groups : An array of strings. Each string contains the name of a group. 42 Valid values for these names are listed below. 43- lantiq,function: A string containing the name of the function to mux to the 44 group. Valid values for function names are listed below. 45 46Valid values for group and function names: 47 48XWAY: (DEPRECATED: Use DANUBE) 49 mux groups: 50 exin0, exin1, exin2, jtag, ebu a23, ebu a24, ebu a25, ebu clk, ebu cs1, 51 ebu wait, nand ale, nand cs1, nand cle, spi, spi_cs1, spi_cs2, spi_cs3, 52 spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi, gpt1, gpt2, 53 gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, gnt2, gnt3, req1, req2, 54 req3 55 56 functions: 57 spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu 58 59XR9: ( DEPRECATED: Use xRX100/xRX200) 60 mux groups: 61 exin0, exin1, exin2, exin3, exin4, jtag, ebu a23, ebu a24, ebu a25, 62 ebu clk, ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy, 63 nand rd, spi, spi_cs1, spi_cs2, spi_cs3, spi_cs4, spi_cs5, spi_cs6, 64 asc0, asc0 cts rts, stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1, 65 clkout2, clkout3, gnt1, gnt2, gnt3, gnt4, req1, req2, req3, req4, mdio, 66 gphy0 led0, gphy0 led1, gphy0 led2, gphy1 led0, gphy1 led1, gphy1 led2 67 68 functions: 69 spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, mdio, gphy 70 71AMAZON: 72 mux groups: 73 exin0, exin1, exin2, jtag, spi_di, spi_do, spi_clk, spi_cs1, spi_cs2, 74 spi_cs3, spi_cs4, spi_cs5, spi_cs6, asc, stp, gpt1, gpt2, gpt3, clkout0, 75 clkout1, clkout2, mdio, dfe led0, dfe led1, ephy led0, ephy led1, ephy led2 76 77 functions: 78 spi, asc, cgu, jtag, exin, stp, gpt, mdio, ephy, dfe 79 80DANUBE: 81 mux groups: 82 exin0, exin1, exin2, jtag, ebu a23, ebu a24, ebu a25, ebu clk, ebu cs1, 83 ebu wait, nand ale, nand cs1, nand cle, spi_di, spi_do, spi_clk, spi_cs1, 84 spi_cs2, spi_cs3, spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi, 85 gpt1, gpt2, gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, gnt2, gnt3, 86 req1, req2, req3, dfe led0, dfe led1 87 88 functions: 89 spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, dfe 90 91xRX100: 92 mux groups: 93 exin0, exin1, exin2, exin3, exin4, ebu a23, ebu a24, ebu a25, ebu clk, 94 ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy, nand rd, 95 spi_di, spi_do, spi_clk, spi_cs1, spi_cs2, spi_cs3, spi_cs4, spi_cs5, 96 spi_cs6, asc0, asc0 cts rts, stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1, 97 clkout2, clkout3, gnt1, gnt2, gnt3, gnt4, req1, req2, req3, req4, mdio, 98 dfe led0, dfe led1 99 100 functions: 101 spi, asc, cgu, exin, stp, gpt, nmi, pci, ebu, mdio, dfe 102 103xRX200: 104 mux groups: 105 exin0, exin1, exin2, exin3, exin4, ebu a23, ebu a24, ebu a25, ebu clk, 106 ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy, nand rd, 107 spi_di, spi_do, spi_clk, spi_cs1, spi_cs2, spi_cs3, spi_cs4, spi_cs5, 108 spi_cs6, usif uart_rx, usif uart_tx, usif uart_rts, usif uart_cts, 109 usif uart_dtr, usif uart_dsr, usif uart_dcd, usif uart_ri, usif spi_di, 110 usif spi_do, usif spi_clk, usif spi_cs0, usif spi_cs1, usif spi_cs2, 111 stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, 112 gnt2, gnt3, gnt4, req1, req2, req3, req4, mdio, dfe led0, dfe led1, 113 gphy0 led0, gphy0 led1, gphy0 led2, gphy1 led0, gphy1 led1, gphy1 led2 114 115 functions: 116 spi, usif, cgu, exin, stp, gpt, nmi, pci, ebu, mdio, dfe, gphy 117 118xRX300: 119 mux groups: 120 exin0, exin1, exin2, exin4, nand ale, nand cs0, nand cs1, nand cle, 121 nand rdy, nand rd, nand_d0, nand_d1, nand_d2, nand_d3, nand_d4, nand_d5, 122 nand_d6, nand_d7, nand_d1, nand wr, nand wp, nand se, spi_di, spi_do, 123 spi_clk, spi_cs1, spi_cs4, spi_cs6, usif uart_rx, usif uart_tx, 124 usif spi_di, usif spi_do, usif spi_clk, usif spi_cs0, stp, clkout2, 125 mdio, dfe led0, dfe led1, ephy0 led0, ephy0 led1, ephy1 led0, ephy1 led1 126 127 functions: 128 spi, usif, cgu, exin, stp, ebu, mdio, dfe, ephy 129 130 131Definition of pin configurations: 132 133Required subnode-properties: 134- lantiq,pins : An array of strings. Each string contains the name of a pin. 135 Valid values for these names are listed below. 136 137Optional subnode-properties: 138- lantiq,pull: Integer, representing the pull-down/up to apply to the pin. 139 0: none, 1: down, 2: up. 140- lantiq,open-drain: Boolean, enables open-drain on the defined pin. 141 142Valid values for XWAY pin names: (DEPRECATED: Use DANUBE) 143 Pinconf pins can be referenced via the names io0-io31. 144 145Valid values for XR9 pin names: (DEPRECATED: Use xrX100/xRX200) 146 Pinconf pins can be referenced via the names io0-io55. 147 148Valid values for AMAZON pin names: 149 Pinconf pins can be referenced via the names io0-io31. 150 151Valid values for DANUBE pin names: 152 Pinconf pins can be referenced via the names io0-io31. 153 154Valid values for xRX100 pin names: 155 Pinconf pins can be referenced via the names io0-io55. 156 157Valid values for xRX200 pin names: 158 Pinconf pins can be referenced via the names io0-io49. 159 160Valid values for xRX300 pin names: 161 Pinconf pins can be referenced via the names io0-io1,io3-io6,io8-io11, 162 io13-io19,io23-io27,io34-io36, 163 io42-io43,io48-io61. 164 165Example: 166 gpio: pinmux@e100b10 { 167 compatible = "lantiq,danube-pinctrl"; 168 pinctrl-names = "default"; 169 pinctrl-0 = <&state_default>; 170 171 #gpio-cells = <2>; 172 gpio-controller; 173 reg = <0xE100B10 0xA0>; 174 175 state_default: pinmux { 176 stp { 177 lantiq,groups = "stp"; 178 lantiq,function = "stp"; 179 }; 180 pci { 181 lantiq,groups = "gnt1"; 182 lantiq,function = "pci"; 183 }; 184 conf_out { 185 lantiq,pins = "io4", "io5", "io6"; /* stp */ 186 lantiq,open-drain; 187 lantiq,pull = <0>; 188 }; 189 }; 190 }; 191