marvell,armada-37xx-pinctrl.txt (3971B)
1* Marvell Armada 37xx SoC pin and gpio controller 2 3Each Armada 37xx SoC come with two pin and gpio controller one for the 4south bridge and the other for the north bridge. 5 6Inside this set of register the gpio latch allows exposing some 7configuration of the SoC and especially the clock frequency of the 8xtal. Hence, this node is a represent as syscon allowing sharing the 9register between multiple hardware block. 10 11GPIO and pin controller: 12------------------------ 13 14Main node: 15 16Refer to pinctrl-bindings.txt in this directory for details of the 17common pinctrl bindings used by client devices, including the meaning 18of the phrase "pin configuration node". 19 20Required properties for pinctrl driver: 21 22- compatible: "marvell,armada3710-sb-pinctrl", "syscon, "simple-mfd" 23 for the south bridge 24 "marvell,armada3710-nb-pinctrl", "syscon, "simple-mfd" 25 for the north bridge 26- reg: The first set of register are for pinctrl/gpio and the second 27 set for the interrupt controller 28- interrupts: list of the interrupt use by the gpio 29 30Available groups and functions for the North bridge: 31 32group: jtag 33 - pins 20-24 34 - functions jtag, gpio 35 36group sdio0 37 - pins 8-10 38 - functions sdio, gpio 39 40group emmc_nb 41 - pins 27-35 42 - functions emmc, gpio 43 44group pwm0 45 - pin 11 (GPIO1-11) 46 - functions pwm, led, gpio 47 48group pwm1 49 - pin 12 50 - functions pwm, led, gpio 51 52group pwm2 53 - pin 13 54 - functions pwm, led, gpio 55 56group pwm3 57 - pin 14 58 - functions pwm, led, gpio 59 60group pmic1 61 - pin 7 62 - functions pmic, gpio 63 64group pmic0 65 - pin 6 66 - functions pmic, gpio 67 68group i2c2 69 - pins 2-3 70 - functions i2c, gpio 71 72group i2c1 73 - pins 0-1 74 - functions i2c, gpio 75 76group spi_cs1 77 - pin 17 78 - functions spi, gpio 79 80group spi_cs2 81 - pin 18 82 - functions spi, gpio 83 84group spi_cs3 85 - pin 19 86 - functions spi, gpio 87 88group onewire 89 - pin 4 90 - functions onewire, gpio 91 92group uart1 93 - pins 25-26 94 - functions uart, gpio 95 96group spi_quad 97 - pins 15-16 98 - functions spi, gpio 99 100group uart2 101 - pins 9-10 and 18-19 102 - functions uart, gpio 103 104Available groups and functions for the South bridge: 105 106group usb32_drvvbus0 107 - pin 36 108 - functions drvbus, gpio 109 110group usb2_drvvbus1 111 - pin 37 112 - functions drvbus, gpio 113 114group sdio_sb 115 - pins 60-65 116 - functions sdio, gpio 117 118group rgmii 119 - pins 42-53 120 - functions mii, gpio 121 122group pcie1 123 - pins 39 124 - functions pcie, gpio 125 126group pcie1_clkreq 127 - pins 40 128 - functions pcie, gpio 129 130group pcie1_wakeup 131 - pins 41 132 - functions pcie, gpio 133 134group smi 135 - pins 54-55 136 - functions smi, gpio 137 138group ptp 139 - pins 56 140 - functions ptp, gpio 141 142group ptp_clk 143 - pin 57 144 - functions ptp, mii 145 146group ptp_trig 147 - pin 58 148 - functions ptp, mii 149 150group mii_col 151 - pin 59 152 - functions mii, mii_err 153 154GPIO subnode: 155 156Please refer to gpio.txt in this directory for details of gpio-ranges property 157and the common GPIO bindings used by client devices. 158 159Required properties for gpio driver under the gpio subnode: 160- interrupts: List of interrupt specifier for the controllers interrupt. 161- gpio-controller: Marks the device node as a gpio controller. 162- #gpio-cells: Should be 2. The first cell is the GPIO number and the 163 second cell specifies GPIO flags, as defined in 164 <dt-bindings/gpio/gpio.h>. Only the GPIO_ACTIVE_HIGH and 165 GPIO_ACTIVE_LOW flags are supported. 166- gpio-ranges: Range of pins managed by the GPIO controller. 167 168Xtal Clock bindings for Marvell Armada 37xx SoCs 169------------------------------------------------ 170 171see Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt 172 173 174Example: 175pinctrl_sb: pinctrl-sb@18800 { 176 compatible = "marvell,armada3710-sb-pinctrl", "syscon", "simple-mfd"; 177 reg = <0x18800 0x100>, <0x18C00 0x20>; 178 gpio { 179 #gpio-cells = <2>; 180 gpio-ranges = <&pinctrl_sb 0 0 29>; 181 gpio-controller; 182 interrupts = 183 <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, 184 <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, 185 <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, 186 <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, 187 <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; 188 }; 189 190 rgmii_pins: mii-pins { 191 groups = "rgmii"; 192 function = "mii"; 193 }; 194 195};