nvidia,tegra114-pinmux.txt (5960B)
1NVIDIA Tegra114 pinmux controller 2 3The Tegra114 pinctrl binding is very similar to the Tegra20 and Tegra30 4pinctrl binding, as described in nvidia,tegra20-pinmux.txt and 5nvidia,tegra30-pinmux.txt. In fact, this document assumes that binding as 6a baseline, and only documents the differences between the two bindings. 7 8Required properties: 9- compatible: "nvidia,tegra114-pinmux" 10- reg: Should contain the register physical address and length for each of 11 the pad control and mux registers. The first bank of address must be the 12 driver strength pad control register address and second bank address must 13 be pinmux register address. 14 15Tegra114 adds the following optional properties for pin configuration subnodes: 16- nvidia,enable-input: Integer. Enable the pin's input path. 0: no, 1: yes. 17- nvidia,open-drain: Integer. Enable open drain mode. 0: no, 1: yes. 18- nvidia,lock: Integer. Lock the pin configuration against further changes 19 until reset. 0: no, 1: yes. 20- nvidia,io-reset: Integer. Reset the IO path. 0: no, 1: yes. 21- nvidia,rcv-sel: Integer. Select VIL/VIH receivers. 0: normal, 1: high. 22- nvidia,drive-type: Integer. Valid range 0...3. 23 24As with Tegra20 and Terga30, see the Tegra TRM for complete details regarding 25which groups support which functionality. 26 27Valid values for pin and group names are: 28 29 per-pin mux groups: 30 31 These all support nvidia,function, nvidia,tristate, nvidia,pull, 32 nvidia,enable-input, nvidia,lock. Some support nvidia,open-drain, 33 nvidia,io-reset and nvidia,rcv-sel. 34 35 ulpi_data0_po1, ulpi_data1_po2, ulpi_data2_po3, ulpi_data3_po4, 36 ulpi_data4_po5, ulpi_data5_po6, ulpi_data6_po7, ulpi_data7_po0, 37 ulpi_clk_py0, ulpi_dir_py1, ulpi_nxt_py2, ulpi_stp_py3, dap3_fs_pp0, 38 dap3_din_pp1, dap3_dout_pp2, dap3_sclk_pp3, pv0, pv1, sdmmc1_clk_pz0, 39 sdmmc1_cmd_pz1, sdmmc1_dat3_py4, sdmmc1_dat2_py5, sdmmc1_dat1_py6, 40 sdmmc1_dat0_py7, clk2_out_pw5, clk2_req_pcc5, hdmi_int_pn7, ddc_scl_pv4, 41 ddc_sda_pv5, uart2_rxd_pc3, uart2_txd_pc2, uart2_rts_n_pj6, 42 uart2_cts_n_pj5, uart3_txd_pw6, uart3_rxd_pw7, uart3_cts_n_pa1, 43 uart3_rts_n_pc0, pu0, pu1, pu2, pu3, pu4, pu5, pu6, gen1_i2c_sda_pc5, 44 gen1_i2c_scl_pc4, dap4_fs_pp4, dap4_din_pp5, dap4_dout_pp6, dap4_sclk_pp7, 45 clk3_out_pee0, clk3_req_pee1, gmi_wp_n_pc7, gmi_iordy_pi5, gmi_wait_pi7, 46 gmi_adv_n_pk0, gmi_clk_pk1, gmi_cs0_n_pj0, gmi_cs1_n_pj2, gmi_cs2_n_pk3, 47 gmi_cs3_n_pk4, gmi_cs4_n_pk2, gmi_cs6_n_pi3, gmi_cs7_n_pi6, gmi_ad0_pg0, 48 gmi_ad1_pg1, gmi_ad2_pg2, gmi_ad3_pg3, gmi_ad4_pg4, gmi_ad5_pg5, 49 gmi_ad6_pg6, gmi_ad7_pg7, gmi_ad8_ph0, gmi_ad9_ph1, gmi_ad10_ph2, 50 gmi_ad11_ph3, gmi_ad12_ph4, gmi_ad13_ph5, gmi_ad14_ph6, gmi_ad15_ph7, 51 gmi_a16_pj7, gmi_a17_pb0, gmi_a18_pb1, gmi_a19_pk7, gmi_wr_n_pi0, 52 gmi_oe_n_pi1, gmi_dqs_p_pj3, gmi_rst_n_pi4, gen2_i2c_scl_pt5, 53 gen2_i2c_sda_pt6, sdmmc4_clk_pcc4, sdmmc4_cmd_pt7, sdmmc4_dat0_paa0, 54 sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, sdmmc4_dat3_paa3, sdmmc4_dat4_paa4, 55 sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, sdmmc4_dat7_paa7, cam_mclk_pcc0, 56 pcc1, pbb0, cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6, 57 pbb7, pcc2, pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, kb_row0_pr0, kb_row1_pr1, 58 kb_row2_pr2, kb_row3_pr3, kb_row4_pr4, kb_row5_pr5, kb_row6_pr6, 59 kb_row7_pr7, kb_row8_ps0, kb_row9_ps1, kb_row10_ps2, kb_col0_pq0, 60 kb_col1_pq1, kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5, 61 kb_col6_pq6, kb_col7_pq7, clk_32k_out_pa0, sys_clk_req_pz5, core_pwr_req, 62 cpu_pwr_req, pwr_int_n, owr, dap1_fs_pn0, dap1_din_pn1, dap1_dout_pn2, 63 dap1_sclk_pn3, clk1_req_pee2, clk1_out_pw4, spdif_in_pk6, spdif_out_pk5, 64 dap2_fs_pa2, dap2_din_pa4, dap2_dout_pa5, dap2_sclk_pa3, dvfs_pwm_px0, 65 gpio_x1_aud_px1, gpio_x3_aud_px3, dvfs_clk_px2, gpio_x4_aud_px4, 66 gpio_x5_aud_px5, gpio_x6_aud_px6, gpio_x7_aud_px7, sdmmc3_clk_pa6, 67 sdmmc3_cmd_pa7, sdmmc3_dat0_pb7, sdmmc3_dat1_pb6, sdmmc3_dat2_pb5, 68 sdmmc3_dat3_pb4, hdmi_cec_pee3, sdmmc1_wp_n_pv3, sdmmc3_cd_n_pv2, 69 gpio_w2_aud_pw2, gpio_w3_aud_pw3, usb_vbus_en0_pn4, usb_vbus_en1_pn5, 70 sdmmc3_clk_lb_in_pee5, sdmmc3_clk_lb_out_pee4, reset_out_n. 71 72 drive groups: 73 74 These all support nvidia,pull-down-strength, nvidia,pull-up-strength, 75 nvidia,slew-rate-rising, nvidia,slew-rate-falling. Most but not all 76 support nvidia,high-speed-mode, nvidia,schmitt, nvidia,low-power-mode 77 and nvidia,drive-type. 78 79 ao1, ao2, at1, at2, at3, at4, at5, cdev1, cdev2, dap1, dap2, dap3, dap4, 80 dbg, sdio3, spi, uaa, uab, uart2, uart3, sdio1, ddc, gma, gme, gmf, gmg, 81 gmh, owr, uda. 82 83Valid values for nvidia,functions are: 84 85 blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3, displaya, 86 displaya_alt, displayb, dtv, emc_dll, extperiph1, extperiph2, 87 extperiph3, gmi, gmi_alt, hda, hsi, i2c1, i2c2, i2c3, i2c4, i2cpwr, 88 i2s0, i2s1, i2s2, i2s3, i2s4, irda, kbc, nand, nand_alt, owr, pmi, 89 pwm0, pwm1, pwm2, pwm3, pwron, reset_out_n, rsvd1, rsvd2, rsvd3, 90 rsvd4, sdmmc1, sdmmc2, sdmmc3, sdmmc4, soc, spdif, spi1, spi2, spi3, 91 spi4, spi5, spi6, sysclk, trace, uarta, uartb, uartc, uartd, ulpi, 92 usb, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, vi, vi_alt1, vi_alt3 93 94Example: 95 96 pinmux: pinmux { 97 compatible = "nvidia,tegra114-pinmux"; 98 reg = <0x70000868 0x148 /* Pad control registers */ 99 0x70003000 0x40c>; /* PinMux registers */ 100 }; 101 102Example board file extract: 103 104 pinctrl { 105 sdmmc4_default: pinmux { 106 sdmmc4_clk_pcc4 { 107 nvidia,pins = "sdmmc4_clk_pcc4", 108 nvidia,function = "sdmmc4"; 109 nvidia,pull = <0>; 110 nvidia,tristate = <0>; 111 }; 112 sdmmc4_dat0_paa0 { 113 nvidia,pins = "sdmmc4_dat0_paa0", 114 "sdmmc4_dat1_paa1", 115 "sdmmc4_dat2_paa2", 116 "sdmmc4_dat3_paa3", 117 "sdmmc4_dat4_paa4", 118 "sdmmc4_dat5_paa5", 119 "sdmmc4_dat6_paa6", 120 "sdmmc4_dat7_paa7"; 121 nvidia,function = "sdmmc4"; 122 nvidia,pull = <2>; 123 nvidia,tristate = <0>; 124 }; 125 }; 126 }; 127 128 sdhci@78000400 { 129 pinctrl-names = "default"; 130 pinctrl-0 = <&sdmmc4_default>; 131 };