nvidia,tegra210-pinmux.txt (8063B)
1NVIDIA Tegra210 pinmux controller 2 3Required properties: 4- compatible: "nvidia,tegra210-pinmux" 5- reg: Should contain a list of base address and size pairs for: 6 - first entry: The APB_MISC_GP_*_PADCTRL registers (pad control) 7 - second entry: The PINMUX_AUX_* registers (pinmux) 8 9Please refer to pinctrl-bindings.txt in this directory for details of the 10common pinctrl bindings used by client devices, including the meaning of the 11phrase "pin configuration node". 12 13Tegra's pin configuration nodes act as a container for an arbitrary number of 14subnodes. Each of these subnodes represents some desired configuration for a 15pin, a group, or a list of pins or groups. This configuration can include the 16mux function to select on those pin(s)/group(s), and various pin configuration 17parameters, such as pull-up, tristate, drive strength, etc. 18 19The name of each subnode is not important; all subnodes should be enumerated 20and processed purely based on their content. 21 22Each subnode only affects those parameters that are explicitly listed. In 23other words, a subnode that lists a mux function but no pin configuration 24parameters implies no information about any pin configuration parameters. 25Similarly, a pin subnode that describes a pullup parameter implies no 26information about e.g. the mux function or tristate parameter. For this 27reason, even seemingly boolean values are actually tristates in this binding: 28unspecified, off, or on. Unspecified is represented as an absent property, 29and off/on are represented as integer values 0 and 1. 30 31See the TRM to determine which properties and values apply to each pin/group. 32Macro values for property values are defined in 33include/dt-binding/pinctrl/pinctrl-tegra.h. 34 35Required subnode-properties: 36- nvidia,pins : An array of strings. Each string contains the name of a pin or 37 group. Valid values for these names are listed below. 38 39Optional subnode-properties: 40- nvidia,function: A string containing the name of the function to mux to the 41 pin or group. 42- nvidia,pull: Integer, representing the pull-down/up to apply to the pin. 43 0: none, 1: down, 2: up. 44- nvidia,tristate: Integer. 45 0: drive, 1: tristate. 46- nvidia,enable-input: Integer. Enable the pin's input path. 47 enable :TEGRA_PIN_ENABLE and 48 disable or output only: TEGRA_PIN_DISABLE. 49- nvidia,open-drain: Integer. 50 enable: TEGRA_PIN_ENABLE. 51 disable: TEGRA_PIN_DISABLE. 52- nvidia,lock: Integer. Lock the pin configuration against further changes 53 until reset. 54 enable: TEGRA_PIN_ENABLE. 55 disable: TEGRA_PIN_DISABLE. 56- nvidia,io-hv: Integer. Select high-voltage receivers. 57 normal: TEGRA_PIN_DISABLE 58 high: TEGRA_PIN_ENABLE 59- nvidia,high-speed-mode: Integer. Enable high speed mode the pins. 60 normal: TEGRA_PIN_DISABLE 61 high: TEGRA_PIN_ENABLE 62- nvidia,schmitt: Integer. Enables Schmitt Trigger on the input. 63 normal: TEGRA_PIN_DISABLE 64 high: TEGRA_PIN_ENABLE 65- nvidia,drive-type: Integer. Valid range 0...3. 66- nvidia,pull-down-strength: Integer. Controls drive strength. 0 is weakest. 67 The range of valid values depends on the pingroup. See "CAL_DRVDN" in the 68 Tegra TRM. 69- nvidia,pull-up-strength: Integer. Controls drive strength. 0 is weakest. 70 The range of valid values depends on the pingroup. See "CAL_DRVUP" in the 71 Tegra TRM. 72- nvidia,slew-rate-rising: Integer. Controls rising signal slew rate. 0 is 73 fastest. The range of valid values depends on the pingroup. See 74 "DRVDN_SLWR" in the Tegra TRM. 75- nvidia,slew-rate-falling: Integer. Controls falling signal slew rate. 0 is 76 fastest. The range of valid values depends on the pingroup. See 77 "DRVUP_SLWF" in the Tegra TRM. 78 79Valid values for pin and group names (nvidia,pin) are: 80 81 Mux groups: 82 83 These correspond to Tegra PINMUX_AUX_* (pinmux) registers. Any property 84 that exists in those registers may be set for the following pin names. 85 86 In Tegra210, many pins also have a dedicated APB_MISC_GP_*_PADCTRL 87 register. Where that is true, and property that exists in that register 88 may also be set on the following pin names. 89 90 als_prox_int_px3, ap_ready_pv5, ap_wake_bt_ph3, ap_wake_nfc_ph7, 91 aud_mclk_pbb0, batt_bcl, bt_rst_ph4, bt_wake_ap_ph5, button_home_py1, 92 button_power_on_px5, button_slide_sw_py0, button_vol_down_px7, 93 button_vol_up_px6, cam1_mclk_ps0, cam1_pwdn_ps7, cam1_strobe_pt1, 94 cam2_mclk_ps1, cam2_pwdn_pt0, cam_af_en_ps5, cam_flash_en_ps6, 95 cam_i2c_scl_ps2, cam_i2c_sda_ps3, cam_rst_ps4cam_rst_ps4, clk_32k_in, 96 clk_32k_out_py5, clk_req, core_pwr_req, cpu_pwr_req, dap1_din_pb1, 97 dap1_dout_pb2, dap1_fs_pb0, dap1_sclk_pb3, dap2_din_paa2, dap2_dout_paa3, 98 dap2_fs_paa0, dap2_sclk_paa1, dap4_din_pj5, dap4_dout_pj6, dap4_fs_pj4, 99 dap4_sclk_pj7, dmic1_clk_pe0, dmic1_dat_pe1, dmic2_clk_pe2, dmic2_dat_pe3, 100 dmic3_clk_pe4, dmic3_dat_pe5, dp_hpd0_pcc6, dvfs_clk_pbb2, dvfs_pwm_pbb1, 101 gen1_i2c_scl_pj1, gen1_i2c_sda_pj0, gen2_i2c_scl_pj2, gen2_i2c_sda_pj3, 102 gen3_i2c_scl_pf0, gen3_i2c_sda_pf1, gpio_x1_aud_pbb3, gpio_x3_aud_pbb4, 103 gps_en_pi2, gps_rst_pi3, hdmi_cec_pcc0, hdmi_int_dp_hpd_pcc1, jtag_rtck, 104 lcd_bl_en_pv1, lcd_bl_pwm_pv0, lcd_gpio1_pv3, lcd_gpio2_pv4, lcd_rst_pv2, 105 lcd_te_py2, modem_wake_ap_px0, motion_int_px2, nfc_en_pi0, nfc_int_pi1, 106 pa6, pcc7, pe6, pe7, pex_l0_clkreq_n_pa1, pex_l0_rst_n_pa0, 107 pex_l1_clkreq_n_pa4, pex_l1_rst_n_pa3, pex_wake_n_pa2, ph6, pk0, pk1, pk2, 108 pk3, pk4, pk5, pk6, pk7, pl0, pl1, pwr_i2c_scl_py3, pwr_i2c_sda_py4, 109 pwr_int_n, pz0, pz1, pz2, pz3, pz4, pz5, qspi_cs_n_pee1, qspi_io0_pee2, 110 qspi_io1_pee3, qspi_io2_pee4, qspi_io3_pee5, qspi_sck_pee0, 111 sata_led_active_pa5, sdmmc1_clk_pm0, sdmmc1_cmd_pm1, sdmmc1_dat0_pm5, 112 sdmmc1_dat1_pm4, sdmmc1_dat2_pm3, sdmmc1_dat3_pm2, sdmmc3_clk_pp0, 113 sdmmc3_cmd_pp1, sdmmc3_dat0_pp5, sdmmc3_dat1_pp4, sdmmc3_dat2_pp3, 114 sdmmc3_dat3_pp2, shutdown, spdif_in_pcc3, spdif_out_pcc2, spi1_cs0_pc3, 115 spi1_cs1_pc4, spi1_miso_pc1, spi1_mosi_pc0, spi1_sck_pc2, spi2_cs0_pb7, 116 spi2_cs1_pdd0, spi2_miso_pb5, spi2_mosi_pb4, spi2_sck_pb6, spi4_cs0_pc6, 117 spi4_miso_pd0, spi4_mosi_pc7, spi4_sck_pc5, temp_alert_px4, touch_clk_pv7, 118 touch_int_px1, touch_rst_pv6, uart1_cts_pu3, uart1_rts_pu2, uart1_rx_pu1, 119 uart1_tx_pu0, uart2_cts_pg3, uart2_rts_pg2, uart2_rx_pg1, uart2_tx_pg0, 120 uart3_cts_pd4, uart3_rts_pd3, uart3_rx_pd2, uart3_tx_pd1, uart4_cts_pi7, 121 uart4_rts_pi6, uart4_rx_pi5, uart4_tx_pi4, usb_vbus_en0_pcc4, 122 usb_vbus_en1_pcc5, wifi_en_ph0, wifi_rst_ph1, wifi_wake_ap_ph2 123 124 Drive groups: 125 126 These correspond to the Tegra APB_MISC_GP_*_PADCTRL (pad control) 127 registers. Note that where one of these registers controls a single pin 128 for which a PINMUX_AUX_* exists, see the list above for the pin name to 129 use when configuring the pinmux. 130 131 pa6, pcc7, pe6, pe7, ph6, pk0, pk1, pk2, pk3, pk4, pk5, pk6, pk7, pl0, pl1, 132 pz0, pz1, pz2, pz3, pz4, pz5, sdmmc1, sdmmc2, sdmmc3, sdmmc4 133 134Valid values for nvidia,functions are: 135 136 aud, bcl, blink, ccla, cec, cldvfs, clk, core, cpu, displaya, displayb, 137 dmic1, dmic2, dmic3, dp, dtv, extperiph3, i2c1, i2c2, i2c3, i2cpmu, i2cvi, 138 i2s1, i2s2, i2s3, i2s4a, i2s4b, i2s5a, i2s5b, iqc0, iqc1, jtag, pe, pe0, 139 pe1, pmi, pwm0, pwm1, pwm2, pwm3, qspi, rsvd0, rsvd1, rsvd2, rsvd3, sata, 140 sdmmc1, sdmmc3, shutdown, soc, sor0, sor1, spdif, spi1, spi2, spi3, spi4, 141 sys, touch, uart, uarta, uartb, uartc, uartd, usb, vgp1, vgp2, vgp3, vgp4, 142 vgp5, vgp6, vimclk, vimclk2 143 144Example: 145 146 pinmux: pinmux@70000800 { 147 compatible = "nvidia,tegra210-pinmux"; 148 reg = <0x0 0x700008d4 0x0 0x2a8>, /* Pad control registers */ 149 <0x0 0x70003000 0x0 0x1000>; /* Mux registers */ 150 151 pinctrl-names = "boot"; 152 pinctrl-0 = <&state_boot>; 153 154 state_boot: pinmux { 155 gen1_i2c_scl_pj1 { 156 nvidia,pins = "gen1_i2c_scl_pj1", 157 nvidia,function = "i2c1"; 158 nvidia,pull = <TEGRA_PIN_PULL_NONE>; 159 nvidia,tristate = <TEGRA_PIN_DISABLE>; 160 nvidia,enable-input = <TEGRA_PIN_ENABLE>; 161 nvidia,open-drain = <TEGRA_PIN_ENABLE>; 162 nvidia,io-hv = <TEGRA_PIN_ENABLE>; 163 }; 164 }; 165 }; 166};