qcom,msm8998-pinctrl.txt (6685B)
1Qualcomm MSM8998 TLMM block 2 3This binding describes the Top Level Mode Multiplexer block found in the 4MSM8998 platform. 5 6- compatible: 7 Usage: required 8 Value type: <string> 9 Definition: must be "qcom,msm8998-pinctrl" 10 11- reg: 12 Usage: required 13 Value type: <prop-encoded-array> 14 Definition: the base address and size of the TLMM register space. 15 16- interrupts: 17 Usage: required 18 Value type: <prop-encoded-array> 19 Definition: should specify the TLMM summary IRQ. 20 21- interrupt-controller: 22 Usage: required 23 Value type: <none> 24 Definition: identifies this node as an interrupt controller 25 26- #interrupt-cells: 27 Usage: required 28 Value type: <u32> 29 Definition: must be 2. Specifying the pin number and flags, as defined 30 in <dt-bindings/interrupt-controller/irq.h> 31 32- gpio-controller: 33 Usage: required 34 Value type: <none> 35 Definition: identifies this node as a gpio controller 36 37- #gpio-cells: 38 Usage: required 39 Value type: <u32> 40 Definition: must be 2. Specifying the pin number and flags, as defined 41 in <dt-bindings/gpio/gpio.h> 42 43- gpio-ranges: 44 Usage: required 45 Definition: see ../gpio/gpio.txt 46 47- gpio-reserved-ranges: 48 Usage: optional 49 Definition: see ../gpio/gpio.txt 50 51Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for 52a general description of GPIO and interrupt bindings. 53 54Please refer to pinctrl-bindings.txt in this directory for details of the 55common pinctrl bindings used by client devices, including the meaning of the 56phrase "pin configuration node". 57 58The pin configuration nodes act as a container for an arbitrary number of 59subnodes. Each of these subnodes represents some desired configuration for a 60pin, a group, or a list of pins or groups. This configuration can include the 61mux function to select on those pin(s)/group(s), and various pin configuration 62parameters, such as pull-up, drive strength, etc. 63 64 65PIN CONFIGURATION NODES: 66 67The name of each subnode is not important; all subnodes should be enumerated 68and processed purely based on their content. 69 70Each subnode only affects those parameters that are explicitly listed. In 71other words, a subnode that lists a mux function but no pin configuration 72parameters implies no information about any pin configuration parameters. 73Similarly, a pin subnode that describes a pullup parameter implies no 74information about e.g. the mux function. 75 76 77The following generic properties as defined in pinctrl-bindings.txt are valid 78to specify in a pin configuration subnode: 79 80- pins: 81 Usage: required 82 Value type: <string-array> 83 Definition: List of gpio pins affected by the properties specified in 84 this subnode. 85 86 Valid pins are: 87 gpio0-gpio149 88 Supports mux, bias and drive-strength 89 90 sdc2_clk, sdc2_cmd, sdc2_data 91 Supports bias and drive-strength 92 93 ufs_reset 94 Supports bias and drive-strength 95 96- function: 97 Usage: required 98 Value type: <string> 99 Definition: Specify the alternative function to be configured for the 100 specified pins. Functions are only valid for gpio pins. 101 Valid values are: 102 103 gpio, adsp_ext, agera_pll, atest_char, atest_gpsadc0, 104 atest_gpsadc1, atest_tsens, atest_tsens2, atest_usb1, 105 atest_usb10, atest_usb11, atest_usb12, atest_usb13, 106 audio_ref, bimc_dte0, bimc_dte1, blsp10_spi, blsp10_spi_a, 107 blsp10_spi_b, blsp11_i2c, blsp1_spi, blsp1_spi_a, 108 blsp1_spi_b, blsp2_spi, blsp9_spi, blsp_i2c1, blsp_i2c2, 109 blsp_i2c3, blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7, 110 blsp_i2c8, blsp_i2c9, blsp_i2c10, blsp_i2c11, blsp_i2c12, 111 blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi4, blsp_spi5, 112 blsp_spi6, blsp_spi7, blsp_spi8, blsp_spi9, blsp_spi10, 113 blsp_spi11, blsp_spi12, blsp_uart1_a, blsp_uart1_b, 114 blsp_uart2_a, blsp_uart2_b, blsp_uart3_a, blsp_uart3_b, 115 blsp_uart7_a, blsp_uart7_b, blsp_uart8, blsp_uart8_a, 116 blsp_uart8_b, blsp_uart9_a, blsp_uart9_b, blsp_uim1_a, 117 blsp_uim1_b, blsp_uim2_a, blsp_uim2_b, blsp_uim3_a, 118 blsp_uim3_b, blsp_uim7_a, blsp_uim7_b, blsp_uim8_a, 119 blsp_uim8_b, blsp_uim9_a, blsp_uim9_b, bt_reset, 120 btfm_slimbus, cam_mclk, cci_async, cci_i2c, cci_timer0, 121 cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng, 122 cri_trng0, cri_trng1, dbg_out, ddr_bist, edp_hot, edp_lcd, 123 gcc_gp1_a, gcc_gp1_b, gcc_gp2_a, gcc_gp2_b, gcc_gp3_a, 124 gcc_gp3_b, hdmi_cec, hdmi_ddc, hdmi_hot, hdmi_rcv, 125 isense_dbg, jitter_bist, ldo_en, ldo_update, lpass_slimbus, 126 m_voc, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, 127 mdp_vsync3, mdp_vsync_a, mdp_vsync_b, modem_tsync, mss_lte, 128 nav_dr, nav_pps, pa_indicator, pci_e0, phase_flag, 129 pll_bypassnl, pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc, 130 pwr_crypto, pwr_modem, pwr_nav, qdss_cti0_a, qdss_cti0_b, 131 qdss_cti1_a, qdss_cti1_b, qdss, qlink_enable, 132 qlink_request, qua_mi2s, sd_card, sd_write, sdc40, sdc41, 133 sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, 134 spkr_i2s, ssbi1, ssc_irq, ter_mi2s, tgu_ch0, tgu_ch1, 135 tsense_pwm1, tsense_pwm2, tsif0, tsif1, 136 uim1_clk, uim1_data, uim1_present, 137 uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset, 138 uim_batt, usb_phy, vfr_1, vsense_clkout, vsense_data0, 139 vsense_data1, vsense_mode, wlan1_adc0, wlan1_adc1, 140 wlan2_adc0, wlan2_adc1, 141 142- bias-disable: 143 Usage: optional 144 Value type: <none> 145 Definition: The specified pins should be configured as no pull. 146 147- bias-pull-down: 148 Usage: optional 149 Value type: <none> 150 Definition: The specified pins should be configured as pull down. 151 152- bias-pull-up: 153 Usage: optional 154 Value type: <none> 155 Definition: The specified pins should be configured as pull up. 156 157- output-high: 158 Usage: optional 159 Value type: <none> 160 Definition: The specified pins are configured in output mode, driven 161 high. 162 Not valid for sdc pins. 163 164- output-low: 165 Usage: optional 166 Value type: <none> 167 Definition: The specified pins are configured in output mode, driven 168 low. 169 Not valid for sdc pins. 170 171- drive-strength: 172 Usage: optional 173 Value type: <u32> 174 Definition: Selects the drive strength for the specified pins, in mA. 175 Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 176 177Example: 178 179 tlmm: pinctrl@03400000 { 180 compatible = "qcom,msm8998-pinctrl"; 181 reg = <0x03400000 0xc00000>; 182 interrupts = <0 208 0>; 183 gpio-controller; 184 #gpio-cells = <2>; 185 gpio-ranges = <&tlmm 0 0 175>; 186 gpio-reserved-ranges = <0 4>, <81 4>; 187 interrupt-controller; 188 #interrupt-cells = <2>; 189 190 uart_console_active: uart_console_active { 191 mux { 192 pins = "gpio4", "gpio5"; 193 function = "blsp_uart8_a"; 194 }; 195 196 config { 197 pins = "gpio4", "gpio5"; 198 drive-strength = <2>; 199 bias-disable; 200 }; 201 }; 202 };