cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

qcom,pmic-mpp.yaml (4632B)

      1# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
      2%YAML 1.2
      3---
      4$id: http://devicetree.org/schemas/pinctrl/qcom,pmic-mpp.yaml#
      5$schema: http://devicetree.org/meta-schemas/core.yaml#
      6
      7title: Qualcomm PMIC Multi-Purpose Pin (MPP) block
      8
      9maintainers:
     10  - Bjorn Andersson <bjorn.andersson@linaro.org>
     11
     12description:
     13  This binding describes the MPP block(s) found in the 8xxx series of
     14  PMIC's from Qualcomm.
     15
     16properties:
     17  compatible:
     18    items:
     19      - enum:
     20          - qcom,pm8018-mpp
     21          - qcom,pm8019-mpp
     22          - qcom,pm8038-mpp
     23          - qcom,pm8058-mpp
     24          - qcom,pm8226-mpp
     25          - qcom,pm8821-mpp
     26          - qcom,pm8841-mpp
     27          - qcom,pm8916-mpp
     28          - qcom,pm8917-mpp
     29          - qcom,pm8921-mpp
     30          - qcom,pm8941-mpp
     31          - qcom,pm8950-mpp
     32          - qcom,pmi8950-mpp
     33          - qcom,pm8994-mpp
     34          - qcom,pma8084-mpp
     35          - qcom,pmi8994-mpp
     36
     37      - enum:
     38          - qcom,spmi-mpp
     39          - qcom,ssbi-mpp
     40
     41  reg:
     42    maxItems: 1
     43
     44  interrupt-controller: true
     45
     46  '#interrupt-cells':
     47    const: 2
     48
     49  gpio-controller: true
     50  gpio-line-names: true
     51
     52  gpio-ranges:
     53    maxItems: 1
     54
     55  '#gpio-cells':
     56    const: 2
     57    description:
     58      The first cell will be used to define gpio number and the
     59      second denotes the flags for this gpio
     60
     61additionalProperties: false
     62
     63required:
     64  - compatible
     65  - reg
     66  - gpio-controller
     67  - '#gpio-cells'
     68  - gpio-ranges
     69  - interrupt-controller
     70
     71patternProperties:
     72  '-state$':
     73    oneOf:
     74      - $ref: "#/$defs/qcom-pmic-mpp-state"
     75      - patternProperties:
     76          "mpp":
     77            $ref: "#/$defs/qcom-pmic-mpp-state"
     78        additionalProperties: false
     79
     80$defs:
     81  qcom-pmic-mpp-state:
     82    type: object
     83    allOf:
     84      - $ref: "pinmux-node.yaml"
     85      - $ref: "pincfg-node.yaml"
     86    properties:
     87      pins:
     88        description:
     89          List of gpio pins affected by the properties specified in
     90          this subnode.  Valid pins are
     91                 - mpp1-mpp4 for pm8841
     92                 - mpp1-mpp4 for pm8916
     93                 - mpp1-mpp8 for pm8941
     94                 - mpp1-mpp4 for pm8950
     95                 - mpp1-mpp4 for pmi8950
     96                 - mpp1-mpp4 for pma8084
     97
     98        items:
     99          pattern: "^mpp([0-9]+)$"
    100
    101      function:
    102        items:
    103          - enum:
    104              - digital
    105              - analog
    106              - sink
    107
    108      bias-disable: true
    109      bias-pull-up: true
    110      bias-high-impedance: true
    111      input-enable: true
    112      output-high: true
    113      output-low: true
    114      power-source: true
    115
    116      qcom,analog-level:
    117        $ref: /schemas/types.yaml#/definitions/uint32
    118        description:
    119          Selects the source for analog output. Valued values are defined in
    120          <dt-binding/pinctrl/qcom,pmic-mpp.h> PMIC_MPP_AOUT_LVL_*
    121        enum: [0, 1, 2, 3, 4, 5, 6, 7]
    122
    123      qcom,atest:
    124        $ref: /schemas/types.yaml#/definitions/uint32
    125        description:
    126          Selects ATEST rail to route to GPIO when it's
    127          configured in analog-pass-through mode.
    128        enum: [1, 2, 3, 4]
    129
    130      qcom,dtest:
    131        $ref: /schemas/types.yaml#/definitions/uint32
    132        description:
    133          Selects DTEST rail to route to GPIO when it's
    134          configured as digital input.
    135        enum: [1, 2, 3, 4]
    136
    137      qcom,amux-route:
    138        $ref: /schemas/types.yaml#/definitions/uint32
    139        description:
    140          Selects the source for analog input. Valid values are defined in
    141          <dt-bindings/pinctrl/qcom,pmic-mpp.h> PMIC_MPP_AMUX_ROUTE_CH5,
    142          PMIC_MPP_AMUX_ROUTE_CH6...
    143        enum: [0, 1, 2, 3, 4, 5, 6, 7]
    144
    145      qcom,paired:
    146        - description:
    147            Indicates that the pin should be operating in paired mode.
    148
    149    required:
    150      - pins
    151      - function
    152
    153    additionalProperties: false
    154
    155examples:
    156  - |
    157    #include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
    158
    159    pm8841_mpp: mpps@a000 {
    160      compatible = "qcom,pm8841-mpp", "qcom,spmi-mpp";
    161      reg = <0xa000 0>;
    162      gpio-controller;
    163      #gpio-cells = <2>;
    164      gpio-ranges = <&pm8841_mpp 0 0 4>;
    165      gpio-line-names = "VDD_PX_BIAS", "WLAN_LED_CTRL",
    166              "BT_LED_CTRL", "GPIO-F";
    167      interrupt-controller;
    168      #interrupt-cells = <2>;
    169
    170      pinctrl-names = "default";
    171      pinctrl-0 = <&pm8841_default>;
    172
    173      mpp1-state {
    174        pins = "mpp1";
    175        function = "digital";
    176        input-enable;
    177        power-source = <PM8841_MPP_S3>;
    178      };
    179
    180      default-state {
    181        gpio-mpp {
    182          pins = "mpp1", "mpp2", "mpp3", "mpp4";
    183          function = "digital";
    184          input-enable;
    185          power-source = <PM8841_MPP_S3>;
    186        };
    187      };
    188    };
    189...