samsung,pinctrl.yaml (11672B)
1# SPDX-License-Identifier: GPL-2.0-only 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Samsung S3C/S5P/Exynos SoC pin controller 8 9maintainers: 10 - Krzysztof Kozlowski <krzk@kernel.org> 11 - Sylwester Nawrocki <s.nawrocki@samsung.com> 12 - Tomasz Figa <tomasz.figa@gmail.com> 13 14description: | 15 This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin 16 controller. 17 18 Pin group settings (like drive strength, pull up/down) are available as 19 macros in include/dt-bindings/pinctrl/samsung.h. 20 21 All the pin controller nodes should be represented in the aliases node using 22 the following format 'pinctrl{n}' where n is a unique number for the alias. 23 24 The controller supports three types of interrupts:: 25 - External GPIO interrupts (see interrupts property in pin controller node); 26 27 - External wake-up interrupts - multiplexed (capable of waking up the system 28 see interrupts property in external wake-up interrupt controller node - 29 samsung,pinctrl-wakeup-interrupt.yaml); 30 31 - External wake-up interrupts - direct (capable of waking up the system, see 32 interrupts property in every bank of pin controller with external wake-up 33 interrupt controller - samsung,pinctrl-gpio-bank.yaml). 34 35properties: 36 $nodename: 37 pattern: "^pinctrl(@.*)?" 38 39 compatible: 40 enum: 41 - samsung,s3c2412-pinctrl 42 - samsung,s3c2416-pinctrl 43 - samsung,s3c2440-pinctrl 44 - samsung,s3c2450-pinctrl 45 - samsung,s3c64xx-pinctrl 46 - samsung,s5pv210-pinctrl 47 - samsung,exynos3250-pinctrl 48 - samsung,exynos4210-pinctrl 49 - samsung,exynos4x12-pinctrl 50 - samsung,exynos5250-pinctrl 51 - samsung,exynos5260-pinctrl 52 - samsung,exynos5410-pinctrl 53 - samsung,exynos5420-pinctrl 54 - samsung,exynos5433-pinctrl 55 - samsung,exynos7-pinctrl 56 - samsung,exynos7885-pinctrl 57 - samsung,exynos850-pinctrl 58 - samsung,exynosautov9-pinctrl 59 - tesla,fsd-pinctrl 60 61 interrupts: 62 description: 63 Required for GPIO banks supporting external GPIO interrupts. 64 maxItems: 1 65 66 power-domains: 67 maxItems: 1 68 69 reg: 70 description: 71 Second base address of the pin controller if the specific registers of 72 the pin controller are separated into the different base address. 73 Only certain banks of certain pin controller might need it. 74 minItems: 1 75 maxItems: 2 76 77 wakeup-interrupt-controller: 78 $ref: samsung,pinctrl-wakeup-interrupt.yaml 79 80patternProperties: 81 "^[a-z]+[0-9]*-gpio-bank$": 82 description: 83 Pin banks of the controller are represented by child nodes of the 84 controller node. Bank name is taken from name of the node. 85 $ref: samsung,pinctrl-gpio-bank.yaml 86 87 "^[a-z0-9-]+-pins$": 88 oneOf: 89 - $ref: samsung,pinctrl-pins-cfg.yaml 90 required: 91 - samsung,pins 92 - type: object 93 patternProperties: 94 "^[a-z0-9-]+-pins$": 95 $ref: samsung,pinctrl-pins-cfg.yaml 96 97 additionalProperties: false 98 99 "^(initial|sleep)-state$": 100 patternProperties: 101 "^(pin-[a-z0-9-]+|[a-z0-9-]+-pin)$": 102 $ref: samsung,pinctrl-pins-cfg.yaml 103 104 properties: 105 samsung,pins: 106 description: See samsung,pinctrl-pins-cfg.yaml 107 $ref: /schemas/types.yaml#/definitions/string-array 108 maxItems: 1 109 110 required: 111 - samsung,pins 112 113 unevaluatedProperties: false 114 115required: 116 - compatible 117 - reg 118 119allOf: 120 - $ref: "pinctrl.yaml#" 121 - if: 122 properties: 123 compatible: 124 contains: 125 const: samsung,exynos5433-pinctrl 126 then: 127 properties: 128 reg: 129 minItems: 1 130 maxItems: 2 131 else: 132 properties: 133 reg: 134 minItems: 1 135 maxItems: 1 136 137additionalProperties: false 138 139examples: 140 - | 141 #include <dt-bindings/pinctrl/samsung.h> 142 143 pinctrl@7f008000 { 144 compatible = "samsung,s3c64xx-pinctrl"; 145 reg = <0x7f008000 0x1000>; 146 interrupt-parent = <&vic1>; 147 interrupts = <21>; 148 149 wakeup-interrupt-controller { 150 compatible = "samsung,s3c64xx-wakeup-eint"; 151 interrupts-extended = <&vic0 0>, 152 <&vic0 1>, 153 <&vic1 0>, 154 <&vic1 1>; 155 }; 156 157 /* Pin bank with external GPIO or muxed external wake-up interrupts */ 158 gpa-gpio-bank { 159 gpio-controller; 160 #gpio-cells = <2>; 161 interrupt-controller; 162 #interrupt-cells = <2>; 163 }; 164 165 // ... 166 167 uart0-data-pins { 168 samsung,pins = "gpa-0", "gpa-1"; 169 samsung,pin-function = <EXYNOS_PIN_FUNC_2>; 170 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; 171 }; 172 173 // ... 174 }; 175 176 - | 177 #include <dt-bindings/interrupt-controller/arm-gic.h> 178 #include <dt-bindings/pinctrl/samsung.h> 179 180 pinctrl@11400000 { 181 compatible = "samsung,exynos4210-pinctrl"; 182 reg = <0x11400000 0x1000>; 183 interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; 184 185 pinctrl-names = "default"; 186 pinctrl-0 = <&sleep0>; 187 188 /* Pin bank with external GPIO or muxed external wake-up interrupts */ 189 gpa0-gpio-bank { 190 gpio-controller; 191 #gpio-cells = <2>; 192 interrupt-controller; 193 #interrupt-cells = <2>; 194 }; 195 196 // ... 197 198 uart0-data-pins { 199 samsung,pins = "gpa0-0", "gpa0-1"; 200 samsung,pin-function = <EXYNOS_PIN_FUNC_2>; 201 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; 202 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; 203 }; 204 205 // ... 206 207 sleep0: sleep-state { 208 gpa0-0-pin { 209 samsung,pins = "gpa0-0"; 210 samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>; 211 samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>; 212 }; 213 214 gpa0-1-pin { 215 samsung,pins = "gpa0-1"; 216 samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT0>; 217 samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>; 218 }; 219 220 // ... 221 }; 222 }; 223 224 - | 225 #include <dt-bindings/interrupt-controller/arm-gic.h> 226 #include <dt-bindings/pinctrl/samsung.h> 227 228 pinctrl@11000000 { 229 compatible = "samsung,exynos4210-pinctrl"; 230 reg = <0x11000000 0x1000>; 231 interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; 232 233 wakeup-interrupt-controller { 234 compatible = "samsung,exynos4210-wakeup-eint"; 235 interrupt-parent = <&gic>; 236 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; 237 }; 238 239 /* Pin bank with external GPIO or muxed external wake-up interrupts */ 240 gpj0-gpio-bank { 241 gpio-controller; 242 #gpio-cells = <2>; 243 interrupt-controller; 244 #interrupt-cells = <2>; 245 }; 246 247 /* Pin bank without external interrupts */ 248 gpy0-gpio-bank { 249 gpio-controller; 250 #gpio-cells = <2>; 251 }; 252 253 /* Pin bank with external direct wake-up interrupts */ 254 gpx0-gpio-bank { 255 gpio-controller; 256 #gpio-cells = <2>; 257 258 interrupt-controller; 259 interrupt-parent = <&gic>; 260 interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, 261 <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, 262 <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, 263 <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, 264 <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, 265 <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, 266 <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, 267 <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; 268 #interrupt-cells = <2>; 269 }; 270 271 // ... 272 273 sd0-clk-pins { 274 samsung,pins = "gpk0-0"; 275 samsung,pin-function = <EXYNOS_PIN_FUNC_2>; 276 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; 277 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; 278 }; 279 280 sd4-bus-width8-pins { 281 part-1-pins { 282 samsung,pins = "gpk0-3", "gpk0-4", 283 "gpk0-5", "gpk0-6"; 284 samsung,pin-function = <EXYNOS_PIN_FUNC_3>; 285 samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; 286 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; 287 }; 288 289 part-2-pins { 290 samsung,pins = "gpk1-3", "gpk1-4", 291 "gpk1-5", "gpk1-6"; 292 samsung,pin-function = <EXYNOS_PIN_FUNC_4>; 293 samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; 294 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; 295 }; 296 }; 297 298 // ... 299 300 otg-gp-pins { 301 samsung,pins = "gpx3-3"; 302 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; 303 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; 304 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; 305 samsung,pin-val = <0>; 306 }; 307 }; 308 309 - | 310 #include <dt-bindings/interrupt-controller/arm-gic.h> 311 #include <dt-bindings/pinctrl/samsung.h> 312 313 pinctrl@10580000 { 314 compatible = "samsung,exynos5433-pinctrl"; 315 reg = <0x10580000 0x1a20>, <0x11090000 0x100>; 316 317 pinctrl-names = "default"; 318 pinctrl-0 = <&initial_alive>; 319 320 wakeup-interrupt-controller { 321 compatible = "samsung,exynos7-wakeup-eint"; 322 interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; 323 }; 324 325 /* Pin bank with external direct wake-up interrupts */ 326 gpa0-gpio-bank { 327 gpio-controller; 328 #gpio-cells = <2>; 329 330 interrupt-controller; 331 interrupt-parent = <&gic>; 332 interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, 333 <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, 334 <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, 335 <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, 336 <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, 337 <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, 338 <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, 339 <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; 340 #interrupt-cells = <2>; 341 }; 342 343 // ... 344 345 te-irq-pins { 346 samsung,pins = "gpf1-3"; 347 samsung,pin-function = <0xf>; 348 }; 349 350 // .. 351 352 initial_alive: initial-state { 353 gpa0-0-pin { 354 samsung,pins = "gpa0-0"; 355 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; 356 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; 357 samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; 358 }; 359 360 // ... 361 }; 362 }; 363 364 - | 365 #include <dt-bindings/interrupt-controller/arm-gic.h> 366 #include <dt-bindings/pinctrl/samsung.h> 367 368 pinctrl@114b0000 { 369 compatible = "samsung,exynos5433-pinctrl"; 370 reg = <0x114b0000 0x1000>; 371 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; 372 power-domains = <&pd_aud>; 373 374 /* Pin bank with external GPIO or muxed external wake-up interrupts */ 375 gpz0-gpio-bank { 376 gpio-controller; 377 #gpio-cells = <2>; 378 interrupt-controller; 379 #interrupt-cells = <2>; 380 }; 381 382 // ... 383 384 i2s0-bus-pins { 385 samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3", 386 "gpz0-4", "gpz0-5", "gpz0-6"; 387 samsung,pin-function = <EXYNOS_PIN_FUNC_2>; 388 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; 389 samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; 390 }; 391 392 // ... 393 };