cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

ltc2952-poweroff.txt (1129B)

      1Binding for the LTC2952 PowerPath controller
      2
      3This chip is used to externally trigger a system shut down. Once the trigger has
      4been sent, the chip's watchdog has to be reset to gracefully shut down.
      5A full powerdown can be triggered via the kill signal.
      6
      7Required properties:
      8
      9- compatible:		Must contain: "lltc,ltc2952"
     10- watchdog-gpios:	phandle + gpio-specifier for the GPIO connected to the
     11			chip's watchdog line
     12- kill-gpios:		phandle + gpio-specifier for the GPIO connected to the
     13			chip's kill line
     14
     15Optional properties:
     16- trigger-gpios:	phandle + gpio-specifier for the GPIO connected to the
     17			chip's trigger line. If this property is not set, the
     18			trigger function is ignored and the chip is kept alive
     19			until an explicit kill signal is received
     20- trigger-delay-ms	The number of milliseconds to wait after trigger line
     21			assertion before executing shut down procedure.
     22			The default is 2500ms.
     23
     24Example:
     25
     26ltc2952 {
     27	compatible = "lltc,ltc2952";
     28
     29	trigger-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
     30	trigger-delay-ms = <2000>;
     31	watchdog-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
     32	kill-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
     33};