cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

bq24190.yaml (2480B)

      1# SPDX-License-Identifier: GPL-2.0
      2# Copyright (C) 2021 Sebastian Reichel
      3%YAML 1.2
      4---
      5$id: "http://devicetree.org/schemas/power/supply/bq24190.yaml#"
      6$schema: "http://devicetree.org/meta-schemas/core.yaml#"
      7
      8title: Binding for TI BQ2419x Li-Ion Battery Charger
      9
     10maintainers:
     11  - Sebastian Reichel <sre@kernel.org>
     12
     13allOf:
     14  - $ref: power-supply.yaml#
     15
     16properties:
     17  compatible:
     18    enum:
     19      - ti,bq24190
     20      - ti,bq24192
     21      - ti,bq24192i
     22      - ti,bq24196
     23
     24  reg:
     25    maxItems: 1
     26
     27  interrupts:
     28    maxItems: 1
     29
     30  usb-otg-vbus:
     31    type: object
     32    description: |
     33      Regulator that is used to control the VBUS voltage direction for
     34      either USB host mode or for charging on the OTG port
     35
     36  ti,system-minimum-microvolt:
     37    description: |
     38      when power is connected and the battery is below minimum system voltage,
     39      the system will be regulated above this setting.
     40
     41  omit-battery-class:
     42    type: boolean
     43    description: |
     44      If this property is set, the operating system does not try to create a
     45      battery device.
     46
     47  monitored-battery:
     48    $ref: /schemas/types.yaml#/definitions/phandle
     49    description: |
     50      phandle to a "simple-battery" compatible node.
     51
     52      This property must be a phandle to a node using the format described
     53      in battery.yaml, with the following properties being required:
     54      - precharge-current-microamp: maximum charge current during precharge phase
     55                                    (typically 20% of battery capacity).
     56      - charge-term-current-microamp: a charge cycle terminates when the battery voltage is
     57                                      above recharge threshold, and the current is below this
     58                                      setting (typically 10% of battery capacity).
     59
     60required:
     61  - compatible
     62  - reg
     63  - interrupts
     64
     65additionalProperties: false
     66
     67examples:
     68  - |
     69    #include <dt-bindings/gpio/gpio.h>
     70    #include <dt-bindings/interrupt-controller/irq.h>
     71
     72    bat: battery {
     73      compatible = "simple-battery";
     74      precharge-current-microamp = <256000>;
     75      charge-term-current-microamp = <128000>;
     76    };
     77
     78    i2c0 {
     79      #address-cells = <1>;
     80      #size-cells = <0>;
     81
     82      charger@6a {
     83        compatible = "ti,bq24190";
     84        reg = <0x6a>;
     85        interrupt-parent = <&gpiochip>;
     86        interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
     87        monitored-battery = <&bat>;
     88        ti,system-minimum-microvolt = <3200000>;
     89
     90        usb_otg_vbus: usb-otg-vbus { };
     91      };
     92    };