cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

bq24257.yaml (3506B)

      1# SPDX-License-Identifier: GPL-2.0
      2# Copyright (C) 2021 Sebastian Reichel
      3%YAML 1.2
      4---
      5$id: "http://devicetree.org/schemas/power/supply/bq24257.yaml#"
      6$schema: "http://devicetree.org/meta-schemas/core.yaml#"
      7
      8title: Binding for bq24250, bq24251 and bq24257 Li-Ion Charger
      9
     10maintainers:
     11  - Sebastian Reichel <sre@kernel.org>
     12
     13allOf:
     14  - $ref: power-supply.yaml#
     15
     16properties:
     17  compatible:
     18    enum:
     19      - ti,bq24250
     20      - ti,bq24251
     21      - ti,bq24257
     22
     23  reg:
     24    maxItems: 1
     25
     26  interrupts:
     27    maxItems: 1
     28
     29  ti,battery-regulation-voltage:
     30    $ref: /schemas/types.yaml#/definitions/uint32
     31    description: maximum charging voltage in uV
     32
     33  ti,charge-current:
     34    $ref: /schemas/types.yaml#/definitions/uint32
     35    description: maximum charging current in uA
     36
     37  ti,termination-current:
     38    $ref: /schemas/types.yaml#/definitions/uint32
     39    description: |
     40      charge will be terminated when current in constant-voltage phase
     41      drops below this value (in uA)
     42
     43  pg-gpios:
     44    description: |
     45      GPIO used for connecting the bq2425x device PG (Power Good) pin.
     46      This pin is not available on all devices however it should be used if
     47      possible as this is the recommended way to obtain the charger's input PG
     48      state. If this pin is not specified a software-based approach for PG
     49      detection is used.
     50    maxItems: 1
     51
     52  ti,current-limit:
     53    $ref: /schemas/types.yaml#/definitions/uint32
     54    description: |
     55      The maximum current to be drawn from the charger's input (in uA).
     56      If this property is not specified, the input limit current is set
     57      automatically using USB D+/D- signal based charger type detection.
     58      If the hardware does not support the D+/D- based detection, a default
     59      of 500,000 is used (=500mA) instead.
     60
     61  ti,ovp-voltage:
     62    $ref: /schemas/types.yaml#/definitions/uint32
     63    description: |
     64      Configures the over voltage protection voltage (in uV).
     65      If not specified a default of 6,5000,000 (=6.5V) is used.
     66
     67  ti,in-dpm-voltage:
     68    $ref: /schemas/types.yaml#/definitions/uint32
     69    description: |
     70      Configures the threshold input voltage for the dynamic power path management (in uV).
     71      If not specified a default of 4,360,000 (=4.36V) is used.
     72
     73required:
     74  - compatible
     75  - reg
     76  - interrupts
     77  - ti,battery-regulation-voltage
     78  - ti,charge-current
     79  - ti,termination-current
     80
     81additionalProperties: false
     82
     83examples:
     84  - |
     85    #include <dt-bindings/gpio/gpio.h>
     86    #include <dt-bindings/interrupt-controller/irq.h>
     87    i2c0 {
     88      #address-cells = <1>;
     89      #size-cells = <0>;
     90
     91      charger@6a {
     92        compatible = "ti,bq24257";
     93        reg = <0x6a>;
     94        interrupt-parent = <&gpio1>;
     95        interrupts = <16 IRQ_TYPE_EDGE_BOTH>;
     96
     97        pg-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
     98
     99        ti,battery-regulation-voltage = <4200000>;
    100        ti,charge-current = <1000000>;
    101        ti,termination-current = <50000>;
    102      };
    103    };
    104  - |
    105    #include <dt-bindings/gpio/gpio.h>
    106    #include <dt-bindings/interrupt-controller/irq.h>
    107    i2c0 {
    108      #address-cells = <1>;
    109      #size-cells = <0>;
    110
    111      charger@6a {
    112        compatible = "ti,bq24250";
    113        reg = <0x6a>;
    114        interrupt-parent = <&gpio1>;
    115        interrupts = <16 IRQ_TYPE_EDGE_BOTH>;
    116
    117        ti,battery-regulation-voltage = <4200000>;
    118        ti,charge-current = <500000>;
    119        ti,termination-current = <50000>;
    120        ti,current-limit = <900000>;
    121        ti,ovp-voltage = <9500000>;
    122        ti,in-dpm-voltage = <4440000>;
    123      };
    124    };