cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

maxim,ds2760.yaml (1108B)

      1# SPDX-License-Identifier: GPL-2.0
      2%YAML 1.2
      3---
      4$id: "http://devicetree.org/schemas/power/supply/maxim,ds2760.yaml#"
      5$schema: "http://devicetree.org/meta-schemas/core.yaml#"
      6
      7title: Maxim DS2760 DT bindings
      8
      9maintainers:
     10  - Sebastian Reichel <sre@kernel.org>
     11
     12description: |
     13  The ds2760 is a w1 slave device and must hence have its sub-node in
     14  DT under a w1 bus master node.
     15
     16allOf:
     17  - $ref: power-supply.yaml#
     18
     19properties:
     20  compatible:
     21    const: maxim,ds2760
     22
     23  maxim,pmod-enabled:
     24    description: |
     25      Allow the DS2760 to enter sleep mode when the DQ line goes low for more than 2 seconds
     26      and leave sleep Mode when the DQ line goes high.
     27    type: boolean
     28
     29  maxim,cache-time-ms:
     30    description: |
     31      Time im milliseconds to cache the data for.
     32      When this time expires, the values are read again from the hardware.
     33      Defaults to 1000.
     34
     35  rated-capacity-microamp-hours:
     36    description: |
     37      The rated capacity of the battery, in mAh.
     38      If not specified, the value stored in the non-volatile chip memory is used.
     39
     40required:
     41  - compatible
     42
     43unevaluatedProperties: false