cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

raideng.txt (2530B)


      1* Freescale 85xx RAID Engine nodes
      2
      3RAID Engine nodes are defined to describe on-chip RAID accelerators.  Each RAID
      4Engine should have a separate node.
      5
      6Supported chips:
      7P5020, P5040
      8
      9Required properties:
     10
     11- compatible:	Should contain "fsl,raideng-v1.0" as the value
     12		This identifies RAID Engine block. 1 in 1.0 represents
     13		major number whereas 0 represents minor number. The
     14		version matches the hardware IP version.
     15- reg:		offset and length of the register set for the device
     16- ranges:	standard ranges property specifying the translation
     17		between child address space and parent address space
     18
     19Example:
     20	/* P5020 */
     21	raideng: raideng@320000 {
     22		compatible = "fsl,raideng-v1.0";
     23		#address-cells = <1>;
     24		#size-cells = <1>;
     25		reg	= <0x320000 0x10000>;
     26		ranges	= <0 0x320000 0x10000>;
     27	};
     28
     29
     30There must be a sub-node for each job queue present in RAID Engine
     31This node must be a sub-node of the main RAID Engine node
     32
     33- compatible:	Should contain "fsl,raideng-v1.0-job-queue" as the value
     34		This identifies the job queue interface
     35- reg:		offset and length of the register set for job queue
     36- ranges:	standard ranges property specifying the translation
     37		between child address space and parent address space
     38
     39Example:
     40	/* P5020 */
     41	raideng_jq0@1000 {
     42		compatible = "fsl,raideng-v1.0-job-queue";
     43		reg	   = <0x1000 0x1000>;
     44		ranges	   = <0x0 0x1000 0x1000>;
     45	};
     46
     47
     48There must be a sub-node for each job ring present in RAID Engine
     49This node must be a sub-node of job queue node
     50
     51- compatible:	Must contain "fsl,raideng-v1.0-job-ring" as the value
     52		This identifies job ring. Should contain either
     53		"fsl,raideng-v1.0-hp-ring" or "fsl,raideng-v1.0-lp-ring"
     54		depending upon whether ring has high or low priority
     55- reg:		offset and length of the register set for job ring
     56- interrupts:	interrupt mapping for job ring IRQ
     57
     58Optional property:
     59
     60- fsl,liodn:	Specifies the LIODN to be used for Job Ring. This
     61		property is normally set by firmware. Value
     62		is of 12-bits which is the LIODN number for this JR.
     63		This property is used by the IOMMU (PAMU) to distinquish
     64		transactions from this JR and than be able to do address
     65		translation & protection accordingly.
     66
     67Example:
     68	/* P5020 */
     69	raideng_jq0@1000 {
     70		compatible = "fsl,raideng-v1.0-job-queue";
     71		reg	   = <0x1000 0x1000>;
     72		ranges	   = <0x0 0x1000 0x1000>;
     73
     74		raideng_jr0: jr@0 {
     75			compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-hp-ring";
     76			reg	   = <0x0 0x400>;
     77			interrupts = <139 2 0 0>;
     78			interrupt-parent = <&mpic>;
     79			fsl,liodn = <0x41>;
     80		};
     81	};