cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

maxim,max8952.yaml (2597B)

      1# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
      2%YAML 1.2
      3---
      4$id: http://devicetree.org/schemas/regulator/maxim,max8952.yaml#
      5$schema: http://devicetree.org/meta-schemas/core.yaml#
      6
      7title: Maxim MAX8952 voltage regulator
      8
      9maintainers:
     10  - Krzysztof Kozlowski <krzk@kernel.org>
     11
     12allOf:
     13  - $ref: regulator.yaml#
     14
     15properties:
     16  compatible:
     17    const: maxim,max8952
     18
     19  max8952,default-mode:
     20    $ref: /schemas/types.yaml#/definitions/uint32
     21    enum: [0, 1, 2, 3]
     22    description: |
     23      index of default DVS voltage
     24
     25  max8952,dvs-mode-microvolt:
     26    minItems: 4
     27    maxItems: 4
     28    items:
     29      minimum: 770000
     30      maximum: 1400000
     31    description: |
     32      Array of 4 integer values defining DVS voltages in microvolts. All values
     33      must be from range <770000, 1400000>.
     34
     35  max8952,en-gpio:
     36    maxItems: 1
     37    description: |
     38      GPIO used to control enable status of regulator
     39
     40  max8952,ramp-speed:
     41    $ref: /schemas/types.yaml#/definitions/uint32
     42    enum: [0, 1, 2, 3, 4, 5, 6, 7]
     43    default: 0
     44    description: |
     45      Voltage ramp speed, values map to:
     46       - 0: 32mV/us
     47       - 1: 16mV/us
     48       - 2: 8mV/us
     49       - 3: 4mV/us
     50       - 4: 2mV/us
     51       - 5: 1mV/us
     52       - 6: 0.5mV/us
     53       - 7: 0.25mV/us
     54      Defaults to 32mV/us if not specified.
     55
     56  max8952,sync-freq:
     57    $ref: /schemas/types.yaml#/definitions/uint32
     58    enum: [0, 1, 2]
     59    default: 0
     60    description: |
     61      Sync frequency, values map to:
     62       - 0: 26 MHz
     63       - 1: 13 MHz
     64       - 2: 19.2 MHz
     65      Defaults to 26 MHz if not specified.
     66
     67  max8952,vid-gpios:
     68    minItems: 2
     69    maxItems: 2
     70    description: |
     71      Array of two GPIO pins used for DVS voltage selection
     72
     73  reg:
     74    maxItems: 1
     75
     76required:
     77  - compatible
     78  - max8952,dvs-mode-microvolt
     79  - reg
     80
     81unevaluatedProperties: false
     82
     83examples:
     84  - |
     85    #include <dt-bindings/gpio/gpio.h>
     86
     87    i2c {
     88        #address-cells = <1>;
     89        #size-cells = <0>;
     90
     91        pmic@60 {
     92            compatible = "maxim,max8952";
     93            reg = <0x60>;
     94
     95            max8952,vid-gpios = <&gpx0 3 GPIO_ACTIVE_HIGH>,
     96                                <&gpx0 4 GPIO_ACTIVE_HIGH>;
     97            max8952,default-mode = <0>;
     98            max8952,dvs-mode-microvolt = <1250000>, <1200000>,
     99                                         <1050000>, <950000>;
    100            max8952,sync-freq = <0>;
    101            max8952,ramp-speed = <0>;
    102
    103            regulator-name = "VARM_1.2V_C210";
    104            regulator-min-microvolt = <770000>;
    105            regulator-max-microvolt = <1400000>;
    106            regulator-always-on;
    107            regulator-boot-on;
    108        };
    109    };