cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

maxim,max8973.yaml (3606B)

      1# SPDX-License-Identifier: GPL-2.0-only
      2%YAML 1.2
      3---
      4$id: http://devicetree.org/schemas/regulator/maxim,max8973.yaml#
      5$schema: http://devicetree.org/meta-schemas/core.yaml#
      6
      7title: Maxim MAX8973/MAX77621 voltage regulator
      8
      9maintainers:
     10  - Krzysztof Kozlowski <krzk@kernel.org>
     11
     12allOf:
     13  - $ref: regulator.yaml#
     14
     15properties:
     16  compatible:
     17    enum:
     18      - maxim,max8973
     19      - maxim,max77621
     20
     21  junction-warn-millicelsius:
     22    description: |
     23      Junction warning temperature threshold in millicelsius. If die
     24      temperature crosses this level then device generates the warning
     25      interrupts.
     26      Please note that thermal functionality is only supported on MAX77621. The
     27      supported threshold warning temperature for MAX77621 are 120 degC and 140
     28      degC.
     29
     30  maxim,dvs-gpio:
     31    maxItems: 1
     32    description: |
     33      GPIO which is connected to DVS pin of device.
     34
     35  maxim,dvs-default-state:
     36    $ref: /schemas/types.yaml#/definitions/uint32
     37    enum: [0, 1]
     38    description: |
     39      Default state of GPIO during initialisation.
     40      1 for HIGH and 0 for LOW.
     41
     42  maxim,externally-enable:
     43    type: boolean
     44    description: |
     45      Externally control the regulator output enable/disable.
     46
     47  maxim,enable-gpio:
     48    maxItems: 1
     49    description: |
     50      GPIO for enable control. If the valid GPIO is provided then externally
     51      enable control will be considered.
     52
     53  maxim,enable-remote-sense:
     54    type: boolean
     55    description: Enable remote sense.
     56
     57  maxim,enable-falling-slew-rate:
     58    type: boolean
     59    description: Enable falling slew rate.
     60
     61  maxim,enable-active-discharge:
     62    type: boolean
     63    description: Eable active discharge.
     64
     65  maxim,enable-frequency-shift:
     66    type: boolean
     67    description: Enable 9% frequency shift.
     68
     69  maxim,enable-bias-control:
     70    type: boolean
     71    description: |
     72      Enable bias control which can reduce the startup delay to 20us from 220us.
     73
     74  maxim,enable-etr:
     75    type: boolean
     76    description: Enable Enhanced Transient Response.
     77
     78  maxim,enable-high-etr-sensitivity:
     79    type: boolean
     80    description: |
     81      Enhanced transient response circuit is enabled and set for high
     82      sensitivity. If this property is available then etr will be enable
     83      default.
     84      Enhanced transient response (ETR) will affect the configuration of CKADV.
     85
     86  reg:
     87    maxItems: 1
     88
     89  interrupts:
     90    maxItems: 1
     91
     92required:
     93  - compatible
     94  - reg
     95
     96unevaluatedProperties: false
     97
     98examples:
     99  - |
    100    i2c {
    101        #address-cells = <1>;
    102        #size-cells = <0>;
    103
    104        regulator@1b {
    105            compatible = "maxim,max8973";
    106            reg = <0x1b>;
    107
    108            regulator-min-microvolt = <935000>;
    109            regulator-max-microvolt = <1200000>;
    110            regulator-boot-on;
    111            regulator-always-on;
    112        };
    113    };
    114
    115  - |
    116    #include <dt-bindings/gpio/gpio.h>
    117    #include <dt-bindings/interrupt-controller/irq.h>
    118
    119    i2c {
    120        #address-cells = <1>;
    121        #size-cells = <0>;
    122
    123        regulator@1b {
    124            compatible = "maxim,max77621";
    125            reg = <0x1b>;
    126            interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
    127
    128            regulator-always-on;
    129            regulator-boot-on;
    130            regulator-min-microvolt = <800000>;
    131            regulator-max-microvolt = <1231250>;
    132            regulator-name = "PPVAR_CPU";
    133            regulator-ramp-delay = <12500>;
    134            maxim,dvs-default-state = <1>;
    135            maxim,enable-active-discharge;
    136            maxim,enable-bias-control;
    137            maxim,enable-etr;
    138            maxim,enable-gpio = <&pmic 5 GPIO_ACTIVE_HIGH>;
    139            maxim,externally-enable;
    140        };
    141    };