cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

richtek,rt5190a-regulator.yaml (4021B)

      1# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
      2%YAML 1.2
      3---
      4$id: http://devicetree.org/schemas/regulator/richtek,rt5190a-regulator.yaml#
      5$schema: http://devicetree.org/meta-schemas/core.yaml#
      6
      7title: Richtek RT5190A PMIC Regulator
      8
      9maintainers:
     10  - ChiYuan Huang <cy_huang@richtek.com>
     11
     12description: |
     13  The RT5190A integrates 1 channel buck controller, 3 channels high efficiency
     14  synchronous buck converters, 1 LDO, I2C control interface and peripherial
     15  logical control.
     16
     17  It also supports mute AC OFF depop sound and quick setting storage while
     18  input power is removed.
     19
     20properties:
     21  compatible:
     22    enum:
     23      - richtek,rt5190a
     24
     25  reg:
     26    maxItems: 1
     27
     28  interrupts:
     29    maxItems: 1
     30
     31  vin2-supply:
     32    description: phandle to buck2 input voltage.
     33
     34  vin3-supply:
     35    description: phandle to buck3 input voltage.
     36
     37  vin4-supply:
     38    description: phandle to buck4 input voltage.
     39
     40  vinldo-supply:
     41    description: phandle to ldo input voltage
     42
     43  richtek,mute-enable:
     44    description: |
     45      The mute function uses 'mutein', 'muteout', and 'vdet' pins as the control
     46      signal. When enabled, The normal behavior is to bypass the 'mutein' signal
     47      'muteout'. But if the power source removal is detected from 'vdet',
     48      whatever the 'mutein' signal is, it will pull down the 'muteout' to force
     49      speakers mute. this function is commonly used to prevent the speaker pop
     50      noise during AC power turned off in the modern TV system design.
     51    type: boolean
     52
     53  regulators:
     54    type: object
     55
     56    patternProperties:
     57      "^buck[1-4]$|^ldo$":
     58        type: object
     59        $ref: regulator.yaml#
     60        description: |
     61          regulator description for buck1 to buck4, and ldo.
     62
     63        properties:
     64          regulator-allowed-modes:
     65            description: |
     66             buck operating mode, only buck1/4 support mode operating.
     67              0: auto mode
     68              1: force pwm mode
     69            items:
     70              enum: [0, 1]
     71
     72          richtek,latchup-enable:
     73            type: boolean
     74            description: |
     75              If specified, undervolt protection mode changes from the default
     76              hiccup to latchup.
     77
     78        unevaluatedProperties: false
     79
     80    additionalProperties: false
     81
     82required:
     83  - compatible
     84  - reg
     85  - regulators
     86
     87additionalProperties: false
     88
     89examples:
     90  - |
     91    #include <dt-bindings/interrupt-controller/irq.h>
     92    #include <dt-bindings/regulator/richtek,rt5190a-regulator.h>
     93
     94    i2c {
     95      #address-cells = <1>;
     96      #size-cells = <0>;
     97
     98      pmic@64 {
     99        compatible = "richtek,rt5190a";
    100        reg = <0x64>;
    101        interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>;
    102        vin2-supply = <&rt5190_buck1>;
    103        vin3-supply = <&rt5190_buck1>;
    104        vin4-supply = <&rt5190_buck1>;
    105
    106        regulators {
    107          rt5190_buck1: buck1 {
    108            regulator-name = "rt5190a-buck1";
    109            regulator-min-microvolt = <5090000>;
    110            regulator-max-microvolt = <5090000>;
    111            regulator-allowed-modes = <RT5190A_OPMODE_AUTO RT5190A_OPMODE_FPWM>;
    112            regulator-boot-on;
    113          };
    114          buck2 {
    115            regulator-name = "rt5190a-buck2";
    116            regulator-min-microvolt = <600000>;
    117            regulator-max-microvolt = <1400000>;
    118            regulator-boot-on;
    119          };
    120          buck3 {
    121            regulator-name = "rt5190a-buck3";
    122            regulator-min-microvolt = <600000>;
    123            regulator-max-microvolt = <1400000>;
    124            regulator-boot-on;
    125          };
    126          buck4 {
    127            regulator-name = "rt5190a-buck4";
    128            regulator-min-microvolt = <850000>;
    129            regulator-max-microvolt = <850000>;
    130            regulator-allowed-modes = <RT5190A_OPMODE_AUTO RT5190A_OPMODE_FPWM>;
    131            regulator-boot-on;
    132          };
    133          ldo {
    134            regulator-name = "rt5190a-ldo";
    135            regulator-min-microvolt = <1200000>;
    136            regulator-max-microvolt = <1200000>;
    137            regulator-boot-on;
    138          };
    139        };
    140      };
    141    };