cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

slg51000.txt (2506B)

      1* Dialog Semiconductor SLG51000 Voltage Regulator
      2
      3Required properties:
      4- compatible : Should be "dlg,slg51000" for SLG51000
      5- reg : Specifies the I2C slave address.
      6- xxx-supply: Input voltage supply regulator for ldo3 to ldo7.
      7  These entries are required if regulators are enabled for a device.
      8  An absence of these properties can cause the regulator registration to fail.
      9  If some of input supply is powered through battery or always-on supply then
     10  also it is required to have these parameters with proper node handle of always
     11  on power supply.
     12    vin3-supply: Input supply for ldo3
     13    vin4-supply: Input supply for ldo4
     14    vin5-supply: Input supply for ldo5
     15    vin6-supply: Input supply for ldo6
     16    vin7-supply: Input supply for ldo7
     17
     18Optional properties:
     19- interrupt-parent : Specifies the reference to the interrupt controller.
     20- interrupts : IRQ line information.
     21- dlg,cs-gpios : Specify a valid GPIO for chip select
     22
     23Sub-nodes:
     24- regulators : This node defines the settings for the regulators.
     25  The content of the sub-node is defined by the standard binding
     26  for regulators; see regulator.txt.
     27
     28  The SLG51000 regulators are bound using their names listed below:
     29    ldo1
     30    ldo2
     31    ldo3
     32    ldo4
     33    ldo5
     34    ldo6
     35    ldo7
     36
     37Optional properties for regulators:
     38- enable-gpios : Specify a valid GPIO for platform control of the regulator.
     39
     40Example:
     41	pmic: slg51000@75 {
     42		compatible = "dlg,slg51000";
     43		reg = <0x75>;
     44
     45		regulators {
     46			ldo1 {
     47			        regulator-name = "ldo1";
     48			        regulator-min-microvolt = <2400000>;
     49			        regulator-max-microvolt = <3300000>;
     50			};
     51
     52			ldo2 {
     53			        regulator-name = "ldo2";
     54			        regulator-min-microvolt = <2400000>;
     55			        regulator-max-microvolt = <3300000>;
     56			};
     57
     58			ldo3 {
     59			        regulator-name = "ldo3";
     60			        regulator-min-microvolt = <1200000>;
     61			        regulator-max-microvolt = <3750000>;
     62			};
     63
     64			ldo4 {
     65			        regulator-name = "ldo4";
     66			        regulator-min-microvolt = <1200000>;
     67			        regulator-max-microvolt = <3750000>;
     68			};
     69
     70			ldo5 {
     71			        regulator-name = "ldo5";
     72			        regulator-min-microvolt = <500000>;
     73			        regulator-max-microvolt = <1200000>;
     74			};
     75
     76			ldo6 {
     77			        regulator-name = "ldo6";
     78			        regulator-min-microvolt = <500000>;
     79			        regulator-max-microvolt = <1200000>;
     80			};
     81
     82			ldo7 {
     83			        regulator-name = "ldo7";
     84			        regulator-min-microvolt = <1200000>;
     85			        regulator-max-microvolt = <3750000>;
     86			};
     87		};
     88	};