tps65090.txt (3235B)
1TPS65090 regulators 2 3Required properties: 4- compatible: "ti,tps65090" 5- reg: I2C slave address 6- interrupts: the interrupt outputs of the controller 7- regulators: A node that houses a sub-node for each regulator within the 8 device. Each sub-node is identified using the node's name, with valid 9 values listed below. The content of each sub-node is defined by the 10 standard binding for regulators; see regulator.txt. 11 dcdc[1-3], fet[1-7] and ldo[1-2] respectively. 12- vsys[1-3]-supply: The input supply for DCDC[1-3] respectively. 13- infet[1-7]-supply: The input supply for FET[1-7] respectively. 14- vsys-l[1-2]-supply: The input supply for LDO[1-2] respectively. 15 16Optional properties: 17- ti,enable-ext-control: This is applicable for DCDC1, DCDC2 and DCDC3. 18 If DCDCs are externally controlled then this property should be there. 19- dcdc-ext-control-gpios: This is applicable for DCDC1, DCDC2 and DCDC3. 20 If DCDCs are externally controlled and if it is from GPIO then GPIO 21 number should be provided. If it is externally controlled and no GPIO 22 entry then driver will just configure this rails as external control 23 and will not provide any enable/disable APIs. 24- ti,overcurrent-wait: This is applicable to FET registers, which have a 25 poorly defined "overcurrent wait" field. If this property is present it 26 should be between 0 - 3. If this property isn't present we won't touch the 27 "overcurrent wait" field and we'll leave it to the BIOS/EC to deal with. 28 29Each regulator is defined using the standard binding for regulators. 30 31Example: 32 33 tps65090@48 { 34 compatible = "ti,tps65090"; 35 reg = <0x48>; 36 interrupts = <0 88 0x4>; 37 38 vsys1-supply = <&some_reg>; 39 vsys2-supply = <&some_reg>; 40 vsys3-supply = <&some_reg>; 41 infet1-supply = <&some_reg>; 42 infet2-supply = <&some_reg>; 43 infet3-supply = <&some_reg>; 44 infet4-supply = <&some_reg>; 45 infet5-supply = <&some_reg>; 46 infet6-supply = <&some_reg>; 47 infet7-supply = <&some_reg>; 48 vsys-l1-supply = <&some_reg>; 49 vsys-l2-supply = <&some_reg>; 50 51 regulators { 52 dcdc1 { 53 regulator-name = "dcdc1"; 54 regulator-boot-on; 55 regulator-always-on; 56 ti,enable-ext-control; 57 dcdc-ext-control-gpios = <&gpio 10 0>; 58 }; 59 60 dcdc2 { 61 regulator-name = "dcdc2"; 62 regulator-boot-on; 63 regulator-always-on; 64 }; 65 66 dcdc3 { 67 regulator-name = "dcdc3"; 68 regulator-boot-on; 69 regulator-always-on; 70 }; 71 72 fet1 { 73 regulator-name = "fet1"; 74 regulator-boot-on; 75 regulator-always-on; 76 }; 77 78 fet2 { 79 regulator-name = "fet2"; 80 regulator-boot-on; 81 regulator-always-on; 82 }; 83 84 fet3 { 85 regulator-name = "fet3"; 86 regulator-boot-on; 87 regulator-always-on; 88 }; 89 90 fet4 { 91 regulator-name = "fet4"; 92 regulator-boot-on; 93 regulator-always-on; 94 }; 95 96 fet5 { 97 regulator-name = "fet5"; 98 regulator-boot-on; 99 regulator-always-on; 100 }; 101 102 fet6 { 103 regulator-name = "fet6"; 104 regulator-boot-on; 105 regulator-always-on; 106 }; 107 108 fet7 { 109 regulator-name = "fet7"; 110 regulator-boot-on; 111 regulator-always-on; 112 }; 113 114 ldo1 { 115 regulator-name = "ldo1"; 116 regulator-boot-on; 117 regulator-always-on; 118 }; 119 120 ldo2 { 121 regulator-name = "ldo2"; 122 regulator-boot-on; 123 regulator-always-on; 124 }; 125 }; 126 };