ti,omap-remoteproc.yaml (10147B)
1# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/remoteproc/ti,omap-remoteproc.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: OMAP4+ Remoteproc Devices 8 9maintainers: 10 - Suman Anna <s-anna@ti.com> 11 12description: 13 The OMAP family of SoCs usually have one or more slave processor sub-systems 14 that are used to offload some of the processor-intensive tasks, or to manage 15 other hardware accelerators, for achieving various system level goals. 16 17 The processor cores in the sub-system are usually behind an IOMMU, and may 18 contain additional sub-modules like Internal RAM and/or ROMs, L1 and/or L2 19 caches, an Interrupt Controller, a Cache Controller etc. 20 21 The OMAP SoCs usually have a DSP processor sub-system and/or an IPU processor 22 sub-system. The DSP processor sub-system can contain any of the TI's C64x, 23 C66x or C67x family of DSP cores as the main execution unit. The IPU processor 24 sub-system usually contains either a Dual-Core Cortex-M3 or Dual-Core 25 Cortex-M4 processors. 26 27 Each remote processor sub-system is represented as a single DT node. Each node 28 has a number of required or optional properties that enable the OS running on 29 the host processor (MPU) to perform the device management of the remote 30 processor and to communicate with the remote processor. The various properties 31 can be classified as constant or variable. The constant properties are 32 dictated by the SoC and does not change from one board to another having the 33 same SoC. Examples of constant properties include 'iommus', 'reg'. The 34 variable properties are dictated by the system integration aspects such as 35 memory on the board, or configuration used within the corresponding firmware 36 image. Examples of variable properties include 'mboxes', 'memory-region', 37 'timers', 'watchdog-timers' etc. 38 39properties: 40 compatible: 41 enum: 42 - ti,omap4-dsp 43 - ti,omap5-dsp 44 - ti,dra7-dsp 45 - ti,omap4-ipu 46 - ti,omap5-ipu 47 - ti,dra7-ipu 48 49 iommus: 50 minItems: 1 51 maxItems: 2 52 description: | 53 phandles to OMAP IOMMU nodes, that need to be programmed 54 for this remote processor to access any external RAM memory or 55 other peripheral device address spaces. This property usually 56 has only a single phandle. Multiple phandles are used only in 57 cases where the sub-system has different ports for different 58 sub-modules within the processor sub-system (eg: DRA7 DSPs), 59 and need the same programming in both the MMUs. 60 61 mboxes: 62 minItems: 1 63 maxItems: 2 64 description: | 65 OMAP Mailbox specifier denoting the sub-mailbox, to be used for 66 communication with the remote processor. The specifier format is 67 as per the bindings, 68 Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml 69 This property should match with the sub-mailbox node used in 70 the firmware image. 71 72 clocks: 73 maxItems: 1 74 description: | 75 Main functional clock for the remote processor 76 77 resets: 78 minItems: 1 79 maxItems: 2 80 description: | 81 Reset handles for the remote processor 82 83 firmware-name: 84 description: | 85 Default name of the firmware to load to the remote processor. 86 87# Optional properties: 88# -------------------- 89# Some of these properties are mandatory on some SoCs, and some are optional 90# depending on the configuration of the firmware image to be executed on the 91# remote processor. The conditions are mentioned for each property. 92# 93# The following are the optional properties: 94 95 memory-region: 96 maxItems: 1 97 description: | 98 phandle to the reserved memory node to be associated 99 with the remoteproc device. The reserved memory node 100 can be a CMA memory node, and should be defined as 101 per the bindings, 102 Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt 103 104 reg: 105 description: | 106 Address space for any remoteproc memories present on 107 the SoC. Should contain an entry for each value in 108 'reg-names'. These are mandatory for all DSP and IPU 109 processors that have them (OMAP4/OMAP5 DSPs do not have 110 any RAMs) 111 112 reg-names: 113 description: | 114 Required names for each of the address spaces defined in 115 the 'reg' property. Expects the names from the following 116 list, in the specified order, each representing the corresponding 117 internal RAM memory region. 118 minItems: 1 119 items: 120 - const: l2ram 121 - const: l1pram 122 - const: l1dram 123 124 ti,bootreg: 125 $ref: /schemas/types.yaml#/definitions/phandle-array 126 items: 127 - items: 128 - description: phandle to the System Control Configuration region 129 - description: register offset of the boot address register 130 - description: the bit shift within the register 131 description: 132 This property is required for all the DSP instances on OMAP4, OMAP5 133 and DRA7xx SoCs. 134 135 ti,autosuspend-delay-ms: 136 description: | 137 Custom autosuspend delay for the remoteproc in milliseconds. 138 Recommended values is preferable to be in the order of couple 139 of seconds. A negative value can also be used to disable the 140 autosuspend behavior. 141 142 ti,timers: 143 $ref: /schemas/types.yaml#/definitions/phandle-array 144 items: 145 maxItems: 1 146 description: | 147 One or more phandles to OMAP DMTimer nodes, that serve 148 as System/Tick timers for the OS running on the remote 149 processors. This will usually be a single timer if the 150 processor sub-system is running in SMP mode, or one per 151 core in the processor sub-system. This can also be used 152 to reserve specific timers to be dedicated to the 153 remote processors. 154 155 This property is mandatory on remote processors requiring 156 external tick wakeup, and to support Power Management 157 features. The timers to be used should match with the 158 timers used in the firmware image. 159 160 ti,watchdog-timers: 161 $ref: /schemas/types.yaml#/definitions/phandle-array 162 items: 163 maxItems: 1 164 description: | 165 One or more phandles to OMAP DMTimer nodes, used to 166 serve as Watchdog timers for the processor cores. This 167 will usually be one per executing processor core, even 168 if the processor sub-system is running a SMP OS. 169 170 The timers to be used should match with the watchdog 171 timers used in the firmware image. 172 173if: 174 properties: 175 compatible: 176 enum: 177 - ti,dra7-dsp 178then: 179 properties: 180 reg: 181 minItems: 3 182 maxItems: 3 183 required: 184 - reg 185 - reg-names 186 - ti,bootreg 187 188else: 189 if: 190 properties: 191 compatible: 192 enum: 193 - ti,omap4-ipu 194 - ti,omap5-ipu 195 - ti,dra7-ipu 196 then: 197 properties: 198 reg: 199 minItems: 1 200 maxItems: 1 201 ti,bootreg: false 202 required: 203 - reg 204 - reg-names 205 206 else: 207 properties: 208 reg: false 209 required: 210 - ti,bootreg 211 212required: 213 - compatible 214 - iommus 215 - mboxes 216 - clocks 217 - resets 218 - firmware-name 219 220additionalProperties: false 221 222examples: 223 - | 224 225 //Example 1: OMAP4 DSP 226 227 /* DSP Reserved Memory node */ 228 #include <dt-bindings/clock/omap4.h> 229 reserved-memory { 230 #address-cells = <1>; 231 #size-cells = <1>; 232 233 dsp_memory_region: dsp-memory@98000000 { 234 compatible = "shared-dma-pool"; 235 reg = <0x98000000 0x800000>; 236 reusable; 237 }; 238 }; 239 240 /* DSP node */ 241 ocp { 242 dsp: dsp { 243 compatible = "ti,omap4-dsp"; 244 ti,bootreg = <&scm_conf 0x304 0>; 245 iommus = <&mmu_dsp>; 246 mboxes = <&mailbox &mbox_dsp>; 247 memory-region = <&dsp_memory_region>; 248 ti,timers = <&timer5>; 249 ti,watchdog-timers = <&timer6>; 250 clocks = <&tesla_clkctrl OMAP4_DSP_CLKCTRL 0>; 251 resets = <&prm_tesla 0>, <&prm_tesla 1>; 252 firmware-name = "omap4-dsp-fw.xe64T"; 253 }; 254 }; 255 256 - |+ 257 258 //Example 2: OMAP5 IPU 259 260 /* IPU Reserved Memory node */ 261 #include <dt-bindings/clock/omap5.h> 262 reserved-memory { 263 #address-cells = <2>; 264 #size-cells = <2>; 265 266 ipu_memory_region: ipu-memory@95800000 { 267 compatible = "shared-dma-pool"; 268 reg = <0 0x95800000 0 0x3800000>; 269 reusable; 270 }; 271 }; 272 273 /* IPU node */ 274 ocp { 275 #address-cells = <1>; 276 #size-cells = <1>; 277 278 ipu: ipu@55020000 { 279 compatible = "ti,omap5-ipu"; 280 reg = <0x55020000 0x10000>; 281 reg-names = "l2ram"; 282 iommus = <&mmu_ipu>; 283 mboxes = <&mailbox &mbox_ipu>; 284 memory-region = <&ipu_memory_region>; 285 ti,timers = <&timer3>, <&timer4>; 286 ti,watchdog-timers = <&timer9>, <&timer11>; 287 clocks = <&ipu_clkctrl OMAP5_MMU_IPU_CLKCTRL 0>; 288 resets = <&prm_core 2>; 289 firmware-name = "omap5-ipu-fw.xem4"; 290 }; 291 }; 292 293 - |+ 294 295 //Example 3: DRA7xx/AM57xx DSP 296 297 /* DSP1 Reserved Memory node */ 298 #include <dt-bindings/clock/dra7.h> 299 reserved-memory { 300 #address-cells = <2>; 301 #size-cells = <2>; 302 303 dsp1_memory_region: dsp1-memory@99000000 { 304 compatible = "shared-dma-pool"; 305 reg = <0x0 0x99000000 0x0 0x4000000>; 306 reusable; 307 }; 308 }; 309 310 /* DSP1 node */ 311 ocp { 312 #address-cells = <1>; 313 #size-cells = <1>; 314 315 dsp1: dsp@40800000 { 316 compatible = "ti,dra7-dsp"; 317 reg = <0x40800000 0x48000>, 318 <0x40e00000 0x8000>, 319 <0x40f00000 0x8000>; 320 reg-names = "l2ram", "l1pram", "l1dram"; 321 ti,bootreg = <&scm_conf 0x55c 0>; 322 iommus = <&mmu0_dsp1>, <&mmu1_dsp1>; 323 mboxes = <&mailbox5 &mbox_dsp1_ipc3x>; 324 memory-region = <&dsp1_memory_region>; 325 ti,timers = <&timer5>; 326 ti,watchdog-timers = <&timer10>; 327 resets = <&prm_dsp1 0>; 328 clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>; 329 firmware-name = "dra7-dsp1-fw.xe66"; 330 }; 331 };