img,pistachio-reset.txt (1679B)
1Pistachio Reset Controller 2============================================================================= 3 4This binding describes a reset controller device that is used to enable and 5disable individual IP blocks within the Pistachio SoC using "soft reset" 6control bits found in the Pistachio SoC top level registers. 7 8The actual action taken when soft reset is asserted is hardware dependent. 9However, when asserted it may not be possible to access the hardware's 10registers, and following an assert/deassert sequence the hardware's previous 11state may no longer be valid. 12 13Please refer to Documentation/devicetree/bindings/reset/reset.txt 14for common reset controller binding usage. 15 16Required properties: 17 18- compatible: Contains "img,pistachio-reset" 19 20- #reset-cells: Contains 1 21 22Example: 23 24 cr_periph: clk@18148000 { 25 compatible = "img,pistachio-cr-periph", "syscon", "simple-mfd"; 26 reg = <0x18148000 0x1000>; 27 clocks = <&clk_periph PERIPH_CLK_SYS>; 28 clock-names = "sys"; 29 #clock-cells = <1>; 30 31 pistachio_reset: reset-controller { 32 compatible = "img,pistachio-reset"; 33 #reset-cells = <1>; 34 }; 35 }; 36 37Specifying reset control of devices 38======================================= 39 40Device nodes should specify the reset channel required in their "resets" 41property, containing a phandle to the pistachio reset device node and an 42index specifying which reset to use, as described in 43Documentation/devicetree/bindings/reset/reset.txt. 44 45Example: 46 47 spdif_out: spdif-out@18100d00 { 48 ... 49 resets = <&pistachio_reset PISTACHIO_RESET_SPDIF_OUT>; 50 reset-names = "rst"; 51 ... 52 }; 53 54Macro definitions for the supported resets can be found in: 55include/dt-bindings/reset/pistachio-resets.h