rtc.yaml (2019B)
1# SPDX-License-Identifier: GPL-2.0 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/rtc/rtc.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: RTC Generic Binding 8 9maintainers: 10 - Alexandre Belloni <alexandre.belloni@bootlin.com> 11 12description: | 13 This document describes generic bindings which can be used to 14 describe Real Time Clock devices in a device tree. 15 16properties: 17 $nodename: 18 pattern: "^rtc(@.*|-[0-9a-f])*$" 19 20 aux-voltage-chargeable: 21 $ref: /schemas/types.yaml#/definitions/uint32 22 enum: [0, 1] 23 description: | 24 Tells whether the battery/supercap of the RTC (if any) is 25 chargeable or not: 26 0: not chargeable 27 1: chargeable 28 29 quartz-load-femtofarads: 30 description: 31 The capacitive load of the quartz(x-tal), expressed in femto 32 Farad (fF). The default value shall be listed (if optional), 33 and likewise all valid values. 34 35 start-year: 36 $ref: /schemas/types.yaml#/definitions/uint32 37 description: 38 If provided, the default hardware range supported by the RTC is 39 shifted so the first usable year is the specified one. 40 41 trickle-diode-disable: 42 $ref: /schemas/types.yaml#/definitions/flag 43 description: 44 Do not use internal trickle charger diode. Should be given if 45 internal trickle charger diode should be disabled. 46 deprecated: true 47 48 trickle-resistor-ohms: 49 description: 50 Selected resistor for trickle charger. Should be given 51 if trickle charger should be enabled. 52 53 trickle-voltage-millivolt: 54 description: 55 Selected voltage for trickle charger. Should be given 56 if trickle charger should be enabled and the trickle voltage is different 57 from the RTC main power supply. 58 59 wakeup-source: 60 $ref: /schemas/types.yaml#/definitions/flag 61 description: 62 Enables wake up of host system on alarm. 63 64 reset-source: 65 $ref: /schemas/types.yaml#/definitions/flag 66 description: 67 The RTC is able to reset the machine. 68 69additionalProperties: true 70 71...