ingenic,uart.yaml (2216B)
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/serial/ingenic,uart.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Ingenic SoCs UART controller devicetree bindings 8 9maintainers: 10 - Paul Cercueil <paul@crapouillou.net> 11 12allOf: 13 - $ref: serial.yaml# 14 15properties: 16 $nodename: 17 pattern: "^serial@[0-9a-f]+$" 18 19 compatible: 20 oneOf: 21 - enum: 22 - ingenic,jz4740-uart 23 - ingenic,jz4760-uart 24 - ingenic,jz4780-uart 25 - ingenic,x1000-uart 26 - items: 27 - enum: 28 - ingenic,jz4770-uart 29 - ingenic,jz4775-uart 30 - const: ingenic,jz4760-uart 31 - items: 32 - const: ingenic,jz4725b-uart 33 - const: ingenic,jz4740-uart 34 35 reg: 36 maxItems: 1 37 38 interrupts: 39 maxItems: 1 40 41 clocks: 42 items: 43 - description: Baud clock 44 - description: UART module clock 45 46 clock-names: 47 items: 48 - const: baud 49 - const: module 50 51 dmas: 52 items: 53 - description: DMA controller phandle and request line for RX 54 - description: DMA controller phandle and request line for TX 55 56 dma-names: 57 items: 58 - const: rx 59 - const: tx 60 61required: 62 - compatible 63 - reg 64 - interrupts 65 - clocks 66 - clock-names 67 - dmas 68 - dma-names 69 70unevaluatedProperties: false 71 72examples: 73 - | 74 #include <dt-bindings/clock/ingenic,jz4780-cgu.h> 75 #include <dt-bindings/dma/jz4780-dma.h> 76 #include <dt-bindings/gpio/gpio.h> 77 serial@10032000 { 78 compatible = "ingenic,jz4780-uart"; 79 reg = <0x10032000 0x100>; 80 81 interrupt-parent = <&intc>; 82 interrupts = <49>; 83 84 clocks = <&ext>, <&cgu JZ4780_CLK_UART2>; 85 clock-names = "baud", "module"; 86 87 dmas = <&dma JZ4780_DMA_UART2_RX 0xffffffff>, 88 <&dma JZ4780_DMA_UART2_TX 0xffffffff>; 89 dma-names = "rx", "tx"; 90 91 bluetooth { 92 compatible = "brcm,bcm4330-bt"; 93 reset-gpios = <&gpf 8 GPIO_ACTIVE_HIGH>; 94 vbat-supply = <&wlan0_power>; 95 device-wakeup-gpios = <&gpf 5 GPIO_ACTIVE_HIGH>; 96 host-wakeup-gpios = <&gpf 6 GPIO_ACTIVE_HIGH>; 97 shutdown-gpios = <&gpf 4 GPIO_ACTIVE_LOW>; 98 }; 99 };