cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

rs485.yaml (1848B)

      1# SPDX-License-Identifier: GPL-2.0
      2%YAML 1.2
      3---
      4$id: http://devicetree.org/schemas/serial/rs485.yaml#
      5$schema: http://devicetree.org/meta-schemas/core.yaml#
      6
      7title: RS485 serial communications Bindings
      8
      9description: The RTS signal is capable of automatically controlling line
     10  direction for the built-in half-duplex mode. The properties described
     11  hereafter shall be given to a half-duplex capable UART node.
     12
     13maintainers:
     14  - Rob Herring <robh@kernel.org>
     15
     16properties:
     17  rs485-rts-delay:
     18    description: prop-encoded-array <a b>
     19    $ref: /schemas/types.yaml#/definitions/uint32-array
     20    items:
     21      items:
     22        - description: Delay between rts signal and beginning of data sent in
     23            milliseconds. It corresponds to the delay before sending data.
     24          default: 0
     25          maximum: 1000
     26        - description: Delay between end of data sent and rts signal in milliseconds.
     27            It corresponds to the delay after sending data and actual release
     28            of the line.
     29          default: 0
     30          maximum: 1000
     31
     32  rs485-rts-active-low:
     33    description: drive RTS low when sending (default is high).
     34    $ref: /schemas/types.yaml#/definitions/flag
     35
     36  rs485-rx-active-high:
     37    description: Polarity of receiver enable signal (when separate from RTS).
     38      True indicates active high (default is low).
     39    $ref: /schemas/types.yaml#/definitions/flag
     40
     41  linux,rs485-enabled-at-boot-time:
     42    description: enables the rs485 feature at boot time. It can be disabled
     43      later with proper ioctl.
     44    $ref: /schemas/types.yaml#/definitions/flag
     45
     46  rs485-rx-during-tx:
     47    description: enables the receiving of data even while sending data.
     48    $ref: /schemas/types.yaml#/definitions/flag
     49
     50  rs485-term-gpios:
     51    description: GPIO pin to enable RS485 bus termination.
     52    maxItems: 1
     53
     54additionalProperties: true
     55
     56...