brcm,cygnus-audio.txt (1905B)
1BROADCOM Cygnus Audio I2S/TDM/SPDIF controller 2 3Required properties: 4 - compatible : "brcm,cygnus-audio" 5 - #address-cells: 32bit valued, 1 cell. 6 - #size-cells: 32bit valued, 0 cell. 7 - reg : Should contain audio registers location and length 8 - reg-names: names of the registers listed in "reg" property 9 Valid names are "aud" and "i2s_in". "aud" contains a 10 set of DMA, I2S_OUT and SPDIF registers. "i2s_in" contains 11 a set of I2S_IN registers. 12 - clocks: PLL and leaf clocks used by audio ports 13 - assigned-clocks: PLL and leaf clocks 14 - assigned-clock-parents: parent clocks of the assigned clocks 15 (usually the PLL) 16 - assigned-clock-rates: List of clock frequencies of the 17 assigned clocks 18 - clock-names: names of 3 leaf clocks used by audio ports 19 Valid names are "ch0_audio", "ch1_audio", "ch2_audio" 20 - interrupts: audio DMA interrupt number 21 22SSP Subnode properties: 23- reg: The index of ssp port interface to use 24 Valid value are 0, 1, 2, or 3 (for spdif) 25 26Example: 27 cygnus_audio: audio@180ae000 { 28 compatible = "brcm,cygnus-audio"; 29 #address-cells = <1>; 30 #size-cells = <0>; 31 reg = <0x180ae000 0xafd>, <0x180aec00 0x1f8>; 32 reg-names = "aud", "i2s_in"; 33 clocks = <&audiopll BCM_CYGNUS_AUDIOPLL_CH0>, 34 <&audiopll BCM_CYGNUS_AUDIOPLL_CH1>, 35 <&audiopll BCM_CYGNUS_AUDIOPLL_CH2>; 36 assigned-clocks = <&audiopll BCM_CYGNUS_AUDIOPLL>, 37 <&audiopll BCM_CYGNUS_AUDIOPLL_CH0>, 38 <&audiopll BCM_CYGNUS_AUDIOPLL_CH1>, 39 <&audiopll BCM_CYGNUS_AUDIOPLL_CH2>; 40 assigned-clock-parents = <&audiopll BCM_CYGNUS_AUDIOPLL>; 41 assigned-clock-rates = <1769470191>, 42 <0>, 43 <0>, 44 <0>; 45 clock-names = "ch0_audio", "ch1_audio", "ch2_audio"; 46 interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; 47 48 ssp0: ssp_port@0 { 49 reg = <0>; 50 }; 51 52 ssp1: ssp_port@1 { 53 reg = <1>; 54 }; 55 56 ssp2: ssp_port@2 { 57 reg = <2>; 58 }; 59 60 spdif: spdif_port@3 { 61 reg = <3>; 62 }; 63 };