cirrus,madera.yaml (3666B)
1# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/sound/cirrus,madera.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Cirrus Logic Madera class audio CODECs 8 9maintainers: 10 - patches@opensource.cirrus.com 11 12description: | 13 This describes audio configuration bindings for these codecs. 14 15 See also the core bindings for the parent MFD driver: 16 17 Documentation/devicetree/bindings/mfd/cirrus,madera.yaml 18 19 and defines for values used in these bindings: 20 21 include/dt-bindings/sound/madera.h 22 23 The properties are all contained in the parent MFD node. 24 25properties: 26 '#sound-dai-cells': 27 description: 28 The first cell indicating the audio interface. 29 const: 1 30 31 cirrus,inmode: 32 description: 33 A list of input mode settings for each input. A maximum 34 of 24 cells, with four cells per input in the order INnAL, 35 INnAR INnBL INnBR. For non-muxed inputs the first two cells 36 for that input set the mode for the left and right channel 37 and the second two cells must be 0. For muxed inputs the 38 first two cells for that input set the mode of the left and 39 right A inputs and the second two cells set the mode of the 40 left and right B inputs. Valid mode values are one of the 41 MADERA_INMODE_xxx. If the array is shorter than the number 42 of inputs the unspecified inputs default to MADERA_INMODE_DIFF. 43 $ref: /schemas/types.yaml#/definitions/uint32-array 44 minItems: 1 45 maxItems: 24 46 items: 47 minimum: 0 48 maximum: 1 49 default: 0 50 51 cirrus,out-mono: 52 description: 53 Mono bit for each output, maximum of six cells if the array 54 is shorter outputs will be set to stereo. 55 $ref: /schemas/types.yaml#/definitions/uint32-array 56 minItems: 1 57 maxItems: 6 58 items: 59 minimum: 0 60 maximum: 1 61 default: 0 62 63 cirrus,dmic-ref: 64 description: | 65 Indicates how the MICBIAS pins have been externally connected 66 to DMICs on each input, one cell per input. 67 68 <IN1 IN2 IN3 ...> 69 70 A value of 0 indicates MICVDD and is the default, 71 other values depend on the codec: For CS47L35 one of the 72 CS47L35_DMIC_REF_xxx values For all other codecs one of 73 the MADERA_DMIC_REF_xxx values Also see the datasheet for a 74 description of the INn_DMIC_SUP field. 75 $ref: /schemas/types.yaml#/definitions/uint32-array 76 minItems: 1 77 maxItems: 6 78 items: 79 minimum: 0 80 maximum: 3 81 default: 0 82 83 cirrus,max-channels-clocked: 84 description: 85 Maximum number of channels that I2S clocks will be generated 86 for. Useful when clock master for systems where the I2S bus 87 has multiple data lines. One cell for each AIF, use a value 88 of zero for AIFs that should be handled normally. 89 $ref: /schemas/types.yaml#/definitions/uint32-array 90 minItems: 1 91 maxItems: 4 92 items: 93 default: 0 94 95 cirrus,pdm-fmt: 96 description: 97 PDM speaker data format, must contain 2 cells (OUT5 and 98 OUT6). See the PDM_SPKn_FMT field in the datasheet for a 99 description of this value. The second cell is ignored for 100 codecs that do not have OUT6. 101 $ref: /schemas/types.yaml#/definitions/uint32-array 102 minItems: 2 103 maxItems: 2 104 105 cirrus,pdm-mute: 106 description: | 107 PDM mute format, must contain 2 cells (OUT5 and OUT6). See the 108 PDM_SPKn_CTRL_1 register in the datasheet for a description 109 of this value. The second cell is ignored for codecs that 110 do not have OUT6. 111 $ref: /schemas/types.yaml#/definitions/uint32-array 112 minItems: 2 113 maxItems: 2 114 115additionalProperties: true