cs53l30.txt (1304B)
1CS53L30 audio CODEC 2 3Required properties: 4 5 - compatible : "cirrus,cs53l30" 6 7 - reg : the I2C address of the device 8 9 - VA-supply, VP-supply : power supplies for the device, 10 as covered in Documentation/devicetree/bindings/regulator/regulator.txt. 11 12Optional properties: 13 14 - reset-gpios : a GPIO spec for the reset pin. 15 16 - mute-gpios : a GPIO spec for the MUTE pin. The active state can be either 17 GPIO_ACTIVE_HIGH or GPIO_ACTIVE_LOW, which would be handled 18 by the driver automatically. 19 20 - cirrus,micbias-lvl : Set the output voltage level on the MICBIAS Pin. 21 0 = Hi-Z 22 1 = 1.80 V 23 2 = 2.75 V 24 25 - cirrus,use-sdout2 : This is a boolean property. If present, it indicates 26 the hardware design connects both SDOUT1 and SDOUT2 27 pins to output data. Otherwise, it indicates that 28 only SDOUT1 is connected for data output. 29 * CS53l30 supports 4-channel data output in the same 30 * frame using two different ways: 31 * 1) Normal I2S mode on two data pins -- each SDOUT 32 * carries 2-channel data in the same time. 33 * 2) TDM mode on one signle data pin -- SDOUT1 carries 34 * 4-channel data per frame. 35 36Example: 37 38codec: cs53l30@48 { 39 compatible = "cirrus,cs53l30"; 40 reg = <0x48>; 41 reset-gpios = <&gpio 54 0>; 42 VA-supply = <&cs53l30_va>; 43 VP-supply = <&cs53l30_vp>; 44};