cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

rt5663.txt (1960B)

      1RT5663 audio CODEC
      2
      3This device supports I2C only.
      4
      5Required properties:
      6
      7- compatible : "realtek,rt5663".
      8
      9- reg : The I2C address of the device.
     10
     11- interrupts : The CODEC's interrupt output.
     12
     13- avdd-supply: Power supply for AVDD, providing 1.8V.
     14
     15- cpvdd-supply: Power supply for CPVDD, providing 3.5V.
     16
     17Optional properties:
     18
     19- "realtek,dc_offset_l_manual"
     20- "realtek,dc_offset_r_manual"
     21- "realtek,dc_offset_l_manual_mic"
     22- "realtek,dc_offset_r_manual_mic"
     23  Based on the different PCB layout, add the manual offset value to
     24  compensate the DC offset for each L and R channel, and they are different
     25  between headphone and headset.
     26- "realtek,impedance_sensing_num"
     27  The matrix row number of the impedance sensing table.
     28  If the value is 0, it means the impedance sensing is not supported.
     29- "realtek,impedance_sensing_table"
     30  The matrix rows of the impedance sensing table are consisted by impedance
     31  minimum, impedance maximun, volume, DC offset w/o and w/ mic of each L and
     32  R channel accordingly. Example is shown as following.
     33  <   0    300  7  0xffd160  0xffd1c0  0xff8a10  0xff8ab0
     34    301  65535  4  0xffe470  0xffe470  0xffb8e0  0xffb8e0>
     35  The first and second column are defined for the impedance range. If the
     36  detected impedance value is in the range, then the volume value of the
     37  third column will be set to codec. In our codec design, each volume value
     38  should compensate different DC offset to avoid the pop sound, and it is
     39  also different between headphone and headset. In the example, the
     40  "realtek,impedance_sensing_num" is 2. It means that there are 2 ranges of
     41  impedance in the impedance sensing function.
     42
     43Pins on the device (for linking into audio routes) for RT5663:
     44
     45  * IN1P
     46  * IN1N
     47  * IN2P
     48  * IN2N
     49  * HPOL
     50  * HPOR
     51
     52Example:
     53
     54rt5663: codec@12 {
     55	compatible = "realtek,rt5663";
     56	reg = <0x12>;
     57	interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
     58	avdd-supply = <&pp1800_a_alc5662>;
     59	cpvdd-supply = <&pp3500_a_alc5662>;
     60};