cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

rt5682.txt (1933B)

      1RT5682 audio CODEC
      2
      3This device supports I2C only.
      4
      5Required properties:
      6
      7- compatible : "realtek,rt5682" or "realtek,rt5682i"
      8
      9- reg : The I2C address of the device.
     10
     11Optional properties:
     12
     13- interrupts : The CODEC's interrupt output.
     14
     15- realtek,dmic1-data-pin
     16  0: dmic1 is not used
     17  1: using GPIO2 pin as dmic1 data pin
     18  2: using GPIO5 pin as dmic1 data pin
     19
     20- realtek,dmic1-clk-pin
     21  0: using GPIO1 pin as dmic1 clock pin
     22  1: using GPIO3 pin as dmic1 clock pin
     23
     24- realtek,jd-src
     25  0: No JD is used
     26  1: using JD1 as JD source
     27
     28- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
     29
     30- realtek,btndet-delay
     31  The debounce delay for push button.
     32  The delay time is realtek,btndet-delay value multiple of 8.192 ms.
     33  If absent, the default is 16.
     34
     35- #clock-cells : Should be set to '<1>',  wclk and bclk sources provided.
     36- clock-output-names : Name given for DAI clocks output.
     37
     38- clocks : phandle and clock specifier for codec MCLK.
     39- clock-names : Clock name string for 'clocks' attribute, should be "mclk".
     40
     41- realtek,dmic-clk-rate-hz : Set the clock rate (hz) for the requirement of
     42  the particular DMIC.
     43
     44- realtek,dmic-delay-ms : Set the delay time (ms) for the requirement of
     45  the particular DMIC.
     46
     47- realtek,dmic-clk-driving-high : Set the high driving of the DMIC clock out.
     48
     49- #sound-dai-cells: Should be set to '<0>'.
     50
     51Pins on the device (for linking into audio routes) for RT5682:
     52
     53  * DMIC L1
     54  * DMIC R1
     55  * IN1P
     56  * HPOL
     57  * HPOR
     58
     59Example:
     60
     61rt5682 {
     62	compatible = "realtek,rt5682i";
     63	reg = <0x1a>;
     64	interrupt-parent = <&gpio>;
     65	interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_LEVEL_HIGH>;
     66	realtek,ldo1-en-gpios =
     67		<&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
     68	realtek,dmic1-data-pin = <1>;
     69	realtek,dmic1-clk-pin = <1>;
     70	realtek,jd-src = <1>;
     71	realtek,btndet-delay = <16>;
     72
     73	#clock-cells = <1>;
     74	clock-output-names = "rt5682-dai-wclk", "rt5682-dai-bclk";
     75
     76	clocks = <&osc>;
     77	clock-names = "mclk";
     78};