cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

tlv320aic31xx.txt (2444B)

      1Texas Instruments - tlv320aic31xx Codec module
      2
      3The tlv320aic31xx serial control bus communicates through I2C protocols
      4
      5Required properties:
      6
      7- compatible - "string" - One of:
      8    "ti,tlv320aic310x" - Generic TLV320AIC31xx with mono speaker amp
      9    "ti,tlv320aic311x" - Generic TLV320AIC31xx with stereo speaker amp
     10    "ti,tlv320aic3100" - TLV320AIC3100 (mono speaker amp, no MiniDSP)
     11    "ti,tlv320aic3110" - TLV320AIC3110 (stereo speaker amp, no MiniDSP)
     12    "ti,tlv320aic3120" - TLV320AIC3120 (mono speaker amp, MiniDSP)
     13    "ti,tlv320aic3111" - TLV320AIC3111 (stereo speaker amp, MiniDSP)
     14    "ti,tlv320dac3100" - TLV320DAC3100 (no ADC, mono speaker amp, no MiniDSP)
     15    "ti,tlv320dac3101" - TLV320DAC3101 (no ADC, stereo speaker amp, no MiniDSP)
     16
     17- reg - <int> -  I2C slave address
     18- HPVDD-supply, SPRVDD-supply, SPLVDD-supply, AVDD-supply, IOVDD-supply,
     19  DVDD-supply : power supplies for the device as covered in
     20  Documentation/devicetree/bindings/regulator/regulator.txt
     21
     22
     23Optional properties:
     24
     25- reset-gpios - GPIO specification for the active low RESET input.
     26- ai31xx-micbias-vg - MicBias Voltage setting
     27        1 or MICBIAS_2_0V - MICBIAS output is powered to 2.0V
     28        2 or MICBIAS_2_5V - MICBIAS output is powered to 2.5V
     29        3 or MICBIAS_AVDD - MICBIAS output is connected to AVDD
     30	If this node is not mentioned or if the value is unknown, then
     31	micbias	is set to 2.0V.
     32- ai31xx-ocmv - output common-mode voltage setting
     33        0 - 1.35V,
     34        1 - 1.5V,
     35        2 - 1.65V,
     36        3 - 1.8V
     37
     38Deprecated properties:
     39
     40- gpio-reset - gpio pin number used for codec reset
     41
     42CODEC output pins:
     43  * HPL
     44  * HPR
     45  * SPL, devices with stereo speaker amp
     46  * SPR, devices with stereo speaker amp
     47  * SPK, devices with mono speaker amp
     48  * MICBIAS
     49
     50CODEC input pins:
     51  * MIC1LP, devices with ADC
     52  * MIC1RP, devices with ADC
     53  * MIC1LM, devices with ADC
     54  * AIN1, devices without ADC
     55  * AIN2, devices without ADC
     56
     57The pins can be used in referring sound node's audio-routing property.
     58
     59Example:
     60#include <dt-bindings/gpio/gpio.h>
     61#include <dt-bindings/sound/tlv320aic31xx.h>
     62
     63tlv320aic31xx: tlv320aic31xx@18 {
     64	compatible = "ti,tlv320aic311x";
     65	reg = <0x18>;
     66
     67	ai31xx-micbias-vg = <MICBIAS_OFF>;
     68
     69	reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
     70
     71	HPVDD-supply = <&regulator>;
     72	SPRVDD-supply = <&regulator>;
     73	SPLVDD-supply = <&regulator>;
     74	AVDD-supply = <&regulator>;
     75	IOVDD-supply = <&regulator>;
     76	DVDD-supply = <&regulator>;
     77};