cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

mediatek-thermal.txt (2186B)


      1* Mediatek Thermal
      2
      3This describes the device tree binding for the Mediatek thermal controller
      4which measures the on-SoC temperatures. This device does not have its own ADC,
      5instead it directly controls the AUXADC via AHB bus accesses. For this reason
      6this device needs phandles to the AUXADC. Also it controls a mux in the
      7apmixedsys register space via AHB bus accesses, so a phandle to the APMIXEDSYS
      8is also needed.
      9
     10Required properties:
     11- compatible:
     12  - "mediatek,mt8173-thermal" : For MT8173 family of SoCs
     13  - "mediatek,mt2701-thermal" : For MT2701 family of SoCs
     14  - "mediatek,mt2712-thermal" : For MT2712 family of SoCs
     15  - "mediatek,mt7622-thermal" : For MT7622 SoC
     16  - "mediatek,mt8183-thermal" : For MT8183 family of SoCs
     17  - "mediatek,mt8516-thermal", "mediatek,mt2701-thermal : For MT8516 family of SoCs
     18- reg: Address range of the thermal controller
     19- interrupts: IRQ for the thermal controller
     20- clocks, clock-names: Clocks needed for the thermal controller. required
     21                       clocks are:
     22		       "therm":	 Main clock needed for register access
     23		       "auxadc": The AUXADC clock
     24- mediatek,auxadc: A phandle to the AUXADC which the thermal controller uses
     25- mediatek,apmixedsys: A phandle to the APMIXEDSYS controller.
     26- #thermal-sensor-cells : Should be 0. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description.
     27
     28Optional properties:
     29- resets: Reference to the reset controller controlling the thermal controller.
     30- nvmem-cells: A phandle to the calibration data provided by a nvmem device. If
     31               unspecified default values shall be used.
     32- nvmem-cell-names: Should be "calibration-data"
     33
     34Example:
     35
     36	thermal: thermal@1100b000 {
     37		#thermal-sensor-cells = <1>;
     38		compatible = "mediatek,mt8173-thermal";
     39		reg = <0 0x1100b000 0 0x1000>;
     40		interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>;
     41		clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
     42		clock-names = "therm", "auxadc";
     43		resets = <&pericfg MT8173_PERI_THERM_SW_RST>;
     44		reset-names = "therm";
     45		mediatek,auxadc = <&auxadc>;
     46		mediatek,apmixedsys = <&apmixedsys>;
     47		nvmem-cells = <&thermal_calibration_data>;
     48		nvmem-cell-names = "calibration-data";
     49	};