cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

ufs-common.yaml (2203B)

      1# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
      2%YAML 1.2
      3---
      4$id: http://devicetree.org/schemas/ufs/ufs-common.yaml#
      5$schema: http://devicetree.org/meta-schemas/core.yaml#
      6
      7title: Common properties for Universal Flash Storage (UFS) Host Controllers
      8
      9maintainers:
     10  - Alim Akhtar <alim.akhtar@samsung.com>
     11  - Avri Altman <avri.altman@wdc.com>
     12
     13properties:
     14  clocks: true
     15
     16  clock-names: true
     17
     18  freq-table-hz:
     19    items:
     20      items:
     21        - description: Minimum frequency for given clock in Hz
     22        - description: Maximum frequency for given clock in Hz
     23    description: |
     24      Array of <min max> operating frequencies in Hz stored in the same order
     25      as the clocks property. If this property is not defined or a value in the
     26      array is "0" then it is assumed that the frequency is set by the parent
     27      clock or a fixed rate clock source.
     28
     29  interrupts:
     30    maxItems: 1
     31
     32  lanes-per-direction:
     33    $ref: /schemas/types.yaml#/definitions/uint32
     34    enum: [1, 2]
     35    default: 2
     36    description:
     37      Number of lanes available per direction.  Note that it is assume same
     38      number of lanes is used both directions at once.
     39
     40  vdd-hba-supply:
     41    description:
     42      Phandle to UFS host controller supply regulator node.
     43
     44  vcc-supply:
     45    description:
     46      Phandle to VCC supply regulator node.
     47
     48  vccq-supply:
     49    description:
     50      Phandle to VCCQ supply regulator node.
     51
     52  vccq2-supply:
     53    description:
     54      Phandle to VCCQ2 supply regulator node.
     55
     56  vcc-supply-1p8:
     57    type: boolean
     58    description:
     59      For embedded UFS devices, valid VCC range is 1.7-1.95V or 2.7-3.6V. This
     60      boolean property when set, specifies to use low voltage range of
     61      1.7-1.95V. Note for external UFS cards this property is invalid and valid
     62      VCC range is always 2.7-3.6V.
     63
     64  vcc-max-microamp:
     65    description:
     66      Specifies max. load that can be drawn from VCC supply.
     67
     68  vccq-max-microamp:
     69    description:
     70      Specifies max. load that can be drawn from VCCQ supply.
     71
     72  vccq2-max-microamp:
     73    description:
     74      Specifies max. load that can be drawn from VCCQ2 supply.
     75
     76dependencies:
     77  freq-table-hz: [ 'clocks' ]
     78
     79required:
     80  - interrupts
     81
     82additionalProperties: true