cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

da8xx-usb.txt (2095B)

      1TI DA8xx MUSB
      2~~~~~~~~~~~~~
      3For DA8xx/OMAP-L1x/AM17xx/AM18xx platforms.
      4
      5Required properties:
      6~~~~~~~~~~~~~~~~~~~~
      7 - compatible : Should be set to "ti,da830-musb".
      8
      9 - reg: Offset and length of the USB controller register set.
     10
     11 - interrupts: The USB interrupt number.
     12
     13 - interrupt-names: Should be set to "mc".
     14
     15 - dr_mode: The USB operation mode. Should be one of "host", "peripheral" or "otg".
     16
     17 - phys: Phandle for the PHY device
     18
     19 - phy-names: Should be "usb-phy"
     20
     21 - dmas: specifies the dma channels
     22
     23 - dma-names: specifies the names of the channels. Use "rxN" for receive
     24   and "txN" for transmit endpoints. N specifies the endpoint number.
     25
     26Optional properties:
     27~~~~~~~~~~~~~~~~~~~~
     28 - vbus-supply: Phandle to a regulator providing the USB bus power.
     29
     30DMA
     31~~~
     32- compatible: ti,da830-cppi41
     33- reg: offset and length of the following register spaces: CPPI DMA Controller,
     34  CPPI DMA Scheduler, Queue Manager
     35- reg-names: "controller", "scheduler", "queuemgr"
     36- #dma-cells: should be set to 2. The first number represents the
     37  channel number (0 … 3 for endpoints 1 … 4).
     38  The second number is 0 for RX and 1 for TX transfers.
     39- dma-channels: should be set to 4 representing the 4 endpoints.
     40- #dma-channels: deprecated
     41
     42Example:
     43	usb_phy: usb-phy {
     44		compatible = "ti,da830-usb-phy";
     45		#phy-cells = <0>;
     46	};
     47	usb0: usb@200000 {
     48		compatible = "ti,da830-musb";
     49		reg = <0x00200000 0x1000>;
     50		ranges;
     51		#address-cells = <1>;
     52		#size-cells = <1>;
     53		interrupts = <58>;
     54		interrupt-names = "mc";
     55
     56		dr_mode = "host";
     57		vbus-supply = <&usb_vbus>;
     58		phys = <&usb_phy 0>;
     59		phy-names = "usb-phy";
     60
     61		dmas = <&cppi41dma 0 0 &cppi41dma 1 0
     62			&cppi41dma 2 0 &cppi41dma 3 0
     63			&cppi41dma 0 1 &cppi41dma 1 1
     64			&cppi41dma 2 1 &cppi41dma 3 1>;
     65		dma-names =
     66			"rx1", "rx2", "rx3", "rx4",
     67			"tx1", "tx2", "tx3", "tx4";
     68
     69
     70		cppi41dma: dma-controller@201000 {
     71			compatible = "ti,da830-cppi41";
     72			reg =  <0x201000 0x1000
     73				0x202000 0x1000
     74				0x204000 0x4000>;
     75			reg-names = "controller", "scheduler", "queuemgr";
     76			interrupts = <58>;
     77			#dma-cells = <2>;
     78			dma-channels = <4>;
     79		};
     80
     81	};